I am wonder if anyone has experience with Toycen Tradesman Variable Speed DC grinder with Cuttmasters CBN wheels? I have been eyeing one for quite awhile but there is not much information on them...
Type: Posts; User: John Fenn; Keyword(s):
I am wonder if anyone has experience with Toycen Tradesman Variable Speed DC grinder with Cuttmasters CBN wheels? I have been eyeing one for quite awhile but there is not much information on them...
I also would avoid shimming the cutterhead. Doing so may effect the planer line up. We have been focusing on the tables for jointer function but remember the cutterhead needs to be parallel with the...
If I understand your concerns, the tables individually have some uneveness or twist. I don't think you can do much to fix that without some specialized flattening/lapping. I don't recall mine being...
John, I have a similar hood. However, I think I need to do some tweaking to improve mine.
Matt, I really don't recall a specific way of tuning. I got the out feed table lined up with the cutter...
It does. I think the chuck is screwed on. When you contact Shelix they have about three different head dimensions. They will forward detailed drawings to you and then you need to verify which one...
I have the same machine. I bought some brass shims from ebay. It consisted of several sheets of brass with different thicknesses. I then used the shims to tune it up starting with setting the...
Replaced our Kitchen Aid with a Bosch three or four years ago. Bosch has a little bit smaller interior but other than that it is much better than Kitchen Aid. Quieter, washes dishes better and the...
I am building some chairs using mortise and tenon joints in the legs. Where the rails join the legs, the tenons interfere with each other. I can either miter the end of the tenons or notch them to...
My son and I built a ping pong table together and used a modified version Mathias Wandel's table leg jointery using mortise and tenon and dowels. The table has made it through both my children's...
I have the chain option and it works great as well. I guess you can't go wrong with either one. I installed the chain version at the time I built my workbench. The installation was simple at that...