Hi
I am looking for an emmert vise and I am wondering what real advantage does the larger emmert has over the smaller model like the no.2
Does the size of the jaws really matters?
I...
Type: Posts; User: Martin Rock; Keyword(s):
Hi
I am looking for an emmert vise and I am wondering what real advantage does the larger emmert has over the smaller model like the no.2
Does the size of the jaws really matters?
I...
ok thanks for your answers
here is a sample
299321
from rust i guess, the saw has been derusted and cleaned but stain spot remains
Hi all
is there any product that can remove stain from a hand saw plate?
thanks
Martin
Hi
I would like to get some information on the stanley ratchet brace model 920-10, 10 inch.
year/quality/etc
thanks
Martin
Hi All
I have some nice blanks of spalted maple infested with bore making creature.
How can I get ride of them and their larvas.
I have tried the microwave before but can't say I had good...
Hi All
Quick question: Is the presence of a burr on the total lenght of the cutting edge automatically means that you can move up to a finer stone? What about the scratch pattern on the bevel?...
Hi All
I would like to get some input from users on the two wheels from tormek,
the black sb250 and the japanese sj250.
How do you like them and what do you use it for?
I plan to use my...
hi all
I am seeking some objective information for the lapanese wheel from tormek (sj 250)
anyone out there have experience with it
thanks
Martin
hi all
I am seeking some objective information for the black wheel from tormek (sb 250)
anyone out there have experience with it
is it much faster?
does it wear better?
How does the stone...
Hi All
I am starting carving.
I want to get the tormek for sharpening my woodworking, carving and turning tools. In all the readings I have done on sharpening carving gouges, it always say...
thanks everyone, getting closer to nirvana :o
Martin
Bob, I talked to Dave at D-way. He sold some wheels to baldor owners but can't recall the model number.
Hi all
I want to buy a baldor 8" grinder model 8100W and a CBN wheel.
I want to make sure they will fit before buying and having it shipped.
Anyone has this setup?
thanks
Dan, You were able to grind a chisel up to the edge and " let it sit there for a while with no burning at all". That is exactly what I wanted to know. That is what I call cool grinding.
thanks
...
How does these cbn wheels work with high carbon steel. Any issue with burning?
I am thinking of buying 2 cbn wheel for a 8" slow speed baldor grinder, but I don`t just sharpen HSS tools. I also...
thanks all for you comments, I am sure learning stuff here. But there is one point I would like to clarify. What makes the strong hold to have a stronger grip on the tenon than the talon (does it...
Hi all
I have been hollowing hf with my talon chuck with #3 jaws. the max opening of these jaws are about 4". So I thought that the bigger the tenon better as far as holding power. On a few...
It is about 7" tall and 4.5 inch large.
thickness is 3/8 and not as uniform as I would have liked :o)
finish is mineral oil and beeswax
I have done about 5 vase prior to this one, but with...
Hi All
I am fairly new to turning, I have been following the creek for some time now and have learned a lot from you guys. Thanks for sharing
This is my first HF with small entry hole (1 1/8...
Hi All
So far my HF (vases) have been done using green wood, allowing the drying process to distort the shape.
I am thinking of first turn the HF about one inch thick , and re-turn once dry.
...
Hi All
Today I have cut a nice 14" in diameter, 12 long beech log into moulding plane blanks and two medium size wooden plane (probably smoothing and scraping plane)
The blanks are quarter...
Hi all
I would like to know why some carvers put a double bevel (one each side) on their flat gouge or chisel.
Can one get by not doing so, and just use his bench chisel.
thanks
Martin
Hi All
I would like to purchase a saw for crosscuting to final lenght at the workbench. I will be perfecting the cut afterwards at the shooting board.
My first thought was to go with a 16" sash...