Search:

Any turners near Clemson SC?
Art

Need to attach many wood pieces to a board (32) and then adjust them while the glue drys. (align the edges) I need a really slow drying wood glue.
Any advice would be appreciated.

Its only a bowl if it will hold water.......otherwise it is a "piece of art"

Unisaw power switch: 2007, 3hp, 240 volt, single phase.
Green switch turns saw on correctly. Red switch (off switch) will cut the saw off however will NOT latch in. .As soon as pressure is taken...

Thanks to all..I really appreciate the additional information.

Now to go shopping........how do I explain to my wife that I need another drill press

art

I would like to buy a floorstand drill press. 6 inches of travel and adjustable speed without moving belts.

The Delta 18 inch has 6+ inches of travel , however is belt adjustable.

The...

According to historical account (clearly not scientifically documented)..the cross of Jesus was made from Dogwood and God declared that in the future, no dogwood tree would grow big enough to make a...

The digital tachs (21.00 from Ebay) really work well. Checked mine with a new 3520B Powermatic and was within 20-25 rpm. Also works on small Jet.

Plenty of stick-ons for multiple tools

Would like to acquire a couple of carbide scrapers. I have a way to make the handles and drill/mill the bar-holder , however have not found a source of the scrapers .
After some inquire, the carbide...

Have had an EB-3 for over a year . Great piece of equipment and dead on accurate. Built like a tank

Check Harbor Freight....black thin foam for lining a drawer...appx 1/8 inch thick..on sale for 2.50. got it Saturday...works great.

Forget it....terrible wood, ugly, too soft, cracks easily, hard to stain.
Send it to me and I will make duck calls from it.

See attached photo:

art jordan

Apparently there is a recent article in Fine Woodworking about using carbide scraper blades (Bahco) for scraping on a lathe.

Anyone have additional info or a copy of the article.

Thanks

Art

If it is a model 113.225931 (with legs), I have a manual. Can email to you.

Belt size is 6x48 and disc is 9 inches.

art

Some please tell me where I can buy anchorseal for eight dollars per gallon.

Local stores want $19.

art jordan

Email from Jet indicates that no wiring diagram is available. I do not have the manual and cannot find one.
Thanks for the try....

I have a Jet DC 1182 dust collector 2 hp 120 or 240 volts.(according to the plate) Someone removed the power switch (a long story).
Anyway, I need help with wiring:
There are four black wires...

Have a Jet 2hp collector...diagram indicates 110 or 220 volts. Want to run on 110 volts until I get the shop rerwired.

Attached is drawing of diagram schematic.
I wired one side of 110 to a screw...

Actually, it is on the shipping yard next to their office, not in the woods. I mark the trees I want with red paint, and they stack them in a pile for me on the yard. The 25 trees I have now( have...

As a newbie, this is some of the most figured ambrosia maple I have seen. Discovered at a local logging firm...the stack is from 2 of about 25 trees available. Unfortunately they are charging us five...

1:Exactly where do you spray the carb cleaner....into the air intake?


2: Any chance of the stuff igniting?

art:confused:

http://www.toolbarn.com/product/delta/50-901/

Photo and listing/price from Toolbarn

Looks like a good deal.

art:D

Found a Delta Dust Collector Mod: 50-901 locally for $500.00.

Never been used, (new) lacks only the tripod legs (stand)..lost somewhere. Item is listed on several sites for 2400---2700. 1800...

Turns out the saw is a USA made Unisaw...Limited edition commercial edition with Bessie and heavy extended side table Model Unisaw LE 36-844

220 volt, left tilt, full mobile base, prob made in...

Photo attached