Search:

Type: Posts; User: Jesse Tutterrow; Keyword(s):

Page 1 of 4 1 2 3 4

Search: Search took 0.01 seconds.

  1. I realize that this thread is 4 years old, but,...

    I realize that this thread is 4 years old, but, my conveyer belt on my Performax 16-32 just broke. For those who have the Klingspor replacement how has it held up?
  2. Can Record Jaws be used on SuperNova 2 chuck?

    I have watched several YouTube videos where the presenter says that Record Jaws and Sorby Jaws can be used on the TeknaTool SuperNova 2 chuck. In yesterday's Woodcraft sales flyer they are having a...
  3. Thanks, will look at Crocs. Someone else...

    Thanks, will look at Crocs. Someone else mentioned this brand.



    It sounds like you are saying that you change shoes several times a day while woodworking. Did I understand you correctly?
  4. David, do you know of a good brand of shoes you...

    David, do you know of a good brand of shoes you would recommend?
  5. Padded floor in workshop or good shoes?

    A friend of mine has done to the expense of adding soft floor mats covering most of his shop floor. Adding multiple floor mats can become cost prohibitive quickly.

    I have a few mats in my shop...
  6. From a reply to an e-mail I had sent Grizzly: ...

    From a reply to an e-mail I had sent Grizzly:

    The G0513X2BF is currently out of stock and not on display in Springfield, MO. We expect to receive it back into stock on approximately October 3,...
  7. Looking for an owner of a Grizzly 17 inch bandsaw in Saint Louis, Missouri area

    I am planning to purchase the Grizzly G0513X2 or G0513X2f. When I e-mailed Grizzly they said that they did not have either models in their Springfield Missouri showroom and even if they did, they...
  8. Poll: I don't see a need for a separate forum for...

    I don't see a need for a separate forum for cabinetry. Instead, we need to encourage people to post cabinet type questions in the Projects forum and we need to support that forum by reading and...
  9. Replies
    15
    Views
    13,718

    My Jet does not have quill lock. I could see...

    My Jet does not have quill lock. I could see where it would be useful, but I can adjust the table.
  10. Replies
    11
    Views
    2,471

    magazines on CD??

    I subscribe to various paper magazines. When I find a project I want to make I photocopy the article onto 11x17 paper and take the paper into the shop. That way when I spill, tear, or otherwise...
  11. Try searching e-bay for "Blum Ecodrill Hinge Jig...

    Try searching e-bay for "Blum Ecodrill Hinge Jig ". Or just do a google search for "Blum Hinge Machine"
  12. Replies
    6
    Views
    2,853

    source for round 2 inch walnut ball?

    My lawyer asked me to shorten his wooden walking stick and to make a 2 inch walnut ball for the top of it. I don't have a lathe. I asked a someone to turn one but getting a perfect round ball is...
  13. I am looking at the 80 to 95 degree summer here...

    I am looking at the 80 to 95 degree summer here in missouri with humidity close to 100%. I would like to cool the air to 75-80 with humidity down around 30% or less.
  14. I am going to ask a similar question. My shop is...

    I am going to ask a similar question. My shop is about 40 feet long and 12 to 16 feet wide with 12 foot ceilings. The most often used tools are in the center. I have a window that looks out onto a...
  15. Does not include any Toyotas

    Does not include any Toyotas
  16. any complaints about Grizzly G0513x2bf bandsaw?

    After much research I have concluded that for the cost of a Powermatic 14" bandsaw I can buy the Grizzly 17" with a foot break and switch.

    Internet research has under covered two common...
  17. Replies
    21
    Views
    3,187

    Suggestions for a 14 inch bandsaw?

    The time has come to replace my 12" craftsman bandsaw with something a little bit bigger.

    Since Jet and Woodcraft/Powermatic are having sales of 15% off this coming week (today thru next Friday)....
  18. Replies
    10
    Views
    5,880

    dust collection hose connector??

    I use 4" flexible hose to connect to machines that are in the middle of my shop. Currently I have a friction fit connector on the hose. Unfortunately, sometimes the hose will slip off without me...
  19. I think the free "weekend" offer is a standing...

    I think the free "weekend" offer is a standing offer. I don't know about the 1/2 off for life offer.

    I too am wondering if it is worth the price. Looking at their offerings I don't see very many...
  20. height of saw outfeed table (my router table)??

    I work in a 90+ year old garage with uneven floors. When I built my roll around router table I sized it so that it's top would be the same height as the table saw (TS) so I could use it as an...
  21. Thanks All, I will use 1/4 inch on 8 of the...

    Thanks All,

    I will use 1/4 inch on 8 of the drawers and Chris's suggestion of 1/2 inch with a rabbit for the 2 with the heavist craft supplies in them.
  22. guidelines for drawer bottom thickness v. weight???

    I am building more drawers for cabinets in my shop. The drawers are 16.5 inches wide by 22 inches deep. Some will be 6 inches high (5.5 usable with 1/4 inch bottom; 5 usable with 1/2 inch bottom).
    ...
  23. driveway de-icer (calcium chloride) question

    Towards the end of last winter, I could not find rock salt, so I purchased a large bag of Prestone Driveway HEAT de-icier.

    For storage I rolled to top of the bag down and clamped it with a couple...
  24. How to determin drawer bottom thickness?

    I am making several 16 x 22 inch (inside dimension) drawers 12" high to hold electrical and plumbing fittings. Most drawers have 1/4" bottoms but I am concerned about the weight.

    How thick would...
  25. Replies
    1
    Views
    2,511

    painting a carved sign

    A friend has a sign over his work shop. It has weathered. The wood is cedar with carved letters and a hammer. I would like to restore the finish on it for him. The hammer has a head with silver paint...
Results 1 to 25 of 100
Page 1 of 4 1 2 3 4