Search:

Larry,
I think my Little Girl is going blind and may not know what is coming near from her vision, I warn her with a "look out" and she moves and is nice most of the times, if I forget she may...

I'll try posting pic 2 again on the trusty Mac.
Ron
I think it worked (it's a Mac, kind of like a MM I think), I used JPEG compression 6 instead of JPEG compression 8.

Ken,

I hope Bob has you for many years to come; Kid (a cat) that had me for 19 years was my best friend when I needed one.

Spot, my avatar, sits on the bathroom door every day, he...

Thanks Ken,
I have a cat (Little Girl) that used to like jumping on the top on doors and now she sometimes has trouble 4 wheeling into my chair, she is +12 years old now.
Yes she thinks she is...

Thanks Bill, I bought the Delta 2 HP thinking I'd build your airfoil blower but then I bought the Clarke blower housing and found out it was designed for a 14" MH impeller.
I didn't think the 2 HP...

Scott,
If the 2 HP delta motor you are referring to is the one goodmember (?) sells/sold it is a 220 volt motor, I think any true 2 HP motor will be the same.
My model number is 62-185.
...

Chris documented his build of the cyclone very well, your answers may be here.
http://www.sawmillcreek.org/showthread.php?t=9933
Ron

I can't get DIY/David on my current CCTV, I would have to change CCTV, ISP, cable modem and loose my address to get DIY and then David may not be available soon on DIY.

I have only seen the Wood...

Ken,
Show us a picture of your cat using it if you can.
TIA
Ron

Betsy,
You could use brass tubing available at hobby shops, K&S is the brand I have seen. It is thin walled and very precise, the tube with 1/4" ID would be 9/32" OD. You could drill a 9/32" hole...

I have yet to see anyone else from SD post anything. Am I the only SD resident here?
I would like to meet/PM other local SMC members if they exist. I live in Rapid City, you don't have to live in...

you see a discarded pallet and you check out what kind of wood they used.
you ever salvaged a pallet to use for setup or test wood.
Ron

Dominic
Very good advice on recovering tools.
I would add to section 9.0 that you mark/index the end covers to the case before you take them apart, this can save a lot of reassembly problems.
...

This is a test.:)
Fine craftsmanship, I couldn't resist taking a picture of it.
You should see the other end of this support.
Thanks Lee, your directions were exactly what was needed.
Ron

Keith,
Beautiful work and design.
Could you have made the mirror removable to allow cleaning?
Just a thought.:)
Ron

Jerry,
I'm not sure if this would work but when it's warm glue sets faster, also if the wood is drier the glue has less working time. Where you live it's getting colder, and a little moisture on...

I have bought only CMT bits after an experience I had with a cheep set that Sears had (I didn’t know any better).
The shanks were so shoddy I had one walk almost all of the way out of the collet,...

I missed your whole reply for some reason or another, Please continue or repost the text.
Ron

I have an older <st1:city><st1:place>Lincoln</st1:place></st1:city> (1980) that weighs about 4500 lbs. I keep it licensed and I live outside of the city so I don’t get any hassles from authorities on...

Jim,
All pages that work are better then pages that break because the creator thought all users had M$ browsers, Brent used a universal tool/platform to create these pages, it is to his...

I visited their site and I was looking at plainers, I clicked on the JJ-13 and the site served me a joiner JJ-60S.
Its a minor problem, the link sent me to product ID=33, it should have sent me to...

We don't have a HD store within 300 miles from here, so if you got the good deal on clamps count yourself lucky and stop rubbing it in, ;) unless you are going to share with us unfortunates. I just...

Dan,

I bought a Delta 37-196 about a year ago (same as 37-275X except 5 year warranty as near as I can tell), I paid less then $500 for it, I also got a mortising jig (34-183) from the...

Jim,

Congratulations on your retirement, I second Jim B’s recommendation that you have all of your stuff backed up and remove your hard drives or move the computers yourself, DAMHIKT.

I...

I did not know about the suit until I read about it on your thread, I have a Craftsman 2 stage 3.5 HP compressor that seems to fit the profile. I sent the notice to the listed URL ond I hope that I...