Search:

Amazon has the Freud 1/8"..
http://www.amazon.com/Freud-80-122-Traditional-Beading-2-InchShank/dp/B00004T7K9/ref=sr_1_1?ie=UTF8&qid=1327139338&sr=8-1

I have installed several 100lb Gliderite slides using Rockler screws and that is a very good deal.

Bob, I'm in the process of building new garage cabinets now to replace 30" deep with 24".
I used 3/4" A/C plywood from Big Blue and was NOT very happy with the ply.

We should get together soon. ...

Shopnotes, Vol. 18, Issue 108, page 6. :-)

Dana, I have to say this is The Best Project on the Creek I have ever seen.
Thank you for showing.

Jim, my Stepson, east of you in North,SC, builted a 24X28X10 shop and wanted to put up fluorescent fixtures.
We both did some research on watts, color, and price. He installed 3-rows of 100watt...

When I turned on my 4 years old HF DC Monday it took at least 3 seconds to come-up to speed and it drew so much electric that it dimmed the lights in the shop to almost nothing.
The DC is on a...

This has been very helpful for me cause I'm having the same problem with my HF DC.

Dick, take the time this week to check the volts coming in to both legs of your shop and keep a record.

Bob, don't buy the double-sided tape from HF like I did, it leaves a mess.

I've been happy with klocket.

Check all the nuts, bolts, and screws. Don't assume they were done at the factory.

Ok, back to the OP!
Donny, you are asking for a simple and straight forward building that a crew
of 5 should complete in 9-working days.

So what's happened with your contractors?

Wish you...

Greg, my stepson bought the Frigidaire heat/cool unit, model#: FRA18EMT2 from Lowes
last spring for his 24'X28'X10' shop and has been very happy with it.

Jack, I covered my table with 1/4" plywood and raised the blade.
Fastened the ply with 4 well placed screws and a few brads and
marked their locations with a RED dot (circle around the screws)....

I also agree with Dave! Keep a can in the shop and one in the garage.

I do the same thing as Lee. If that helps!

Ed, sorry I never got over your way to meet you, but you enjoy your retirement.

Rick, the steps are to save block and each should be the height of the block they will be using, 8" in most cases. So there must be a drop on the right side of the garage door.

An important step...

You have a great DC and using a shop vac. We all get some dust.
If you are getting too much then I would look for the leak or leaks
in the DC and its' lines and the shop vac. Dust will will be in...

Right handed and both sides.

You and yours have a safe one.

Buy Suffolk Machinery blades. Buy 3 for 16.95 each and get the 4th free.
They are a great blade.

My brother and I have used this contact cement for about 10 years to
stick metal casino chips on clocks and tables.
...

Simply Green or Purple Power will break down and absorb permanent ink marker.
WD-40 will break down tape.
Doing one-at-a-time, working in with your fingers and
giving them time to work.
Then give...

I bought the "Complete Garage Air Kit" (item #66747) from HF to make it easy (hopefully)
to do a complete makeover of my air system. I have had both oil and dry-air lines for
over 10 years now.