The link didn't point directly to the item, search for SCK-042
Type: Posts; User: Bob Johnson; Keyword(s):
The link didn't point directly to the item, search for SCK-042
I ran across this ...
Can I spray Zinnser Sealcoat when it's 50 degrees in the garage? How long should I wait between coats?
Bob Johnson
Use notepad or some other text editor to create a batch file named something like "fixthings.bat". Put your two command lines in the file and save it.
On your desktop, right click and select new,...
If you rotate the piece you are trying to cut 90 degrees, and cut a 30 degree angle on it, you will get a 60 degree angle. Rather than having the piece parallel to the miter saw fence, it will be...
I've decided to try to step up to spraying finishes. I've acquired a Harbor Freight 43430 gravity fed hvlp gun. My first step will be spraying SealCoat. I understand that SealCoat is about a 2 lb....
I had a 6" Jet with the handwheels and upgraded to a DJ20 with the levers. I didn't really see any difference in adjustability. From my view, wheels vs. levers shouldn't enter into the deciding on...
Terre Hooks stopped by today to deliver the lunch-box planer and stand I bought from him. Terre is the youngster in the first picture. The second picture shows what he had in the back of his truck....
I bought one of those about a month ago. Something I seldom need. It does work. I used it to cut angle iron from a bed frame to make one of my sheet goods holders. Worked much better than a hack...
I was asked in a PM to provide some more detail on the removable dust hood I made for my miter saw. My saw is the Makita LS1013. The dust bag by itself is just a little bit better than worthless. ...
I have just finished mine, its based on the one in Wood Magazine Dec 1999. I added a lift off hood to contain the dust. I used a 12 x 6 x 6 register boot to connect to the dust collector. With the...
I bought one of Dino's smart bases for my right bladed Bosch saw, just the smart base - not the whole setup. I just run it against a straight edge. It works well and does a good job. I also have a...
Alan, when you tone your shellac, what do you use for toner?
Bob
The article appeared in the December 1999 issue #119.
Bob
A client whom I have built some maple ladder desks and shelves for wants me to build some flat panel maple doors with double action hinges to block the view into the kitchen. He wants two doors...
The PC detail sander. I gave it to a friend (He's still a friend). I think he gave it to an enemy.
Bob
Thanks to everyone for their comments. At this point I'm going to regroup and restart my planning for the cyclone closet. A neighbor down the street has a used metal clad exterior door (free), so...
Jim,
Do you think that the holes in the pegboard are an important part of the sound reduction? Some of the tempered hardboard I have seen at Lowes or Home Depot has a rough side, no holes might...
Steve, what is "soundboard" and where do you get it? I have never heard of it before.
Bob
Frank, thats a good idea to build my own door from 2" rigid insulation. Does anyone have any idea on how putting 2" rigid insulation in the walls would compare to using 3 1/2" fiber-glass batts in...
I'm getting ready to build a closet around the cyclone to try to quiet things down some. I guess that a prehung steel exterior door with weather stripping would be the best choice, but that gets a...
Hi Frank,
Mine is a basement shop, four rooms separated by open stud walls. The rooms are 13x28, 12x22, 12x17, and 6x15 with 9 foot ceilings. Plus 3.5x10 lumber storage under the stairs. I only...
My complaint with the LS1013 is that it is very difficult to get it back to exactly 90 degrees after tilting for a compound cut. I wish that I had gotten a machine that only tilted one way. I find...
Anyone know what generic bags will fit a Porter-Cable 7812? Thanks
Try deleting your cookies. In IE, tools->options, hit the delete cookies button.