Search:

I am also running an M-300 on Windows 7 and Windows 8. I use a USB to Parallel cable and have had no issues at all once I found a good cable. That was a little bit of an issue, as I tried about 3...

I also have an M300 with a 30watt tube. The cost to replace the tube with a 50 watt tube is nearly 5k, and the power supply will also need to be replaced as it is only capable of a 30w tube. By the...

I have a Vanguard 3400 that I retired about a year or so ago. It really is a good, strong machine, but the thing to remember with it is that it pretty much is what it is. a 1980's vintage engraver....

As far as using inlace, there are a few trips that I can offer you, as I use inlace quite a bit and have had really good luck with it. 1st of all, make sure that the area that you are going to inlay...

I have rebuilt several of the 7000's, and generally if the ink is dried in the heads, it will cost more to replace the heads than the printer is worth. I have one here right now that has a bad board...

I am not sure what machine you are using, but I would first look at my optics closely, and make sure that they are actually clean, and don't have something either sticking on them, or there is not a...

I'll be totally honest with you, I have used both the General Chemicals stuff, and the Laserbits stuff. It is very similar, except that I have found the laserbits stuff dries a little faster, and...

I've used the gen chem stuff, actually have some kicking around here somewhere. It is not PVC Based. It will not work on unfinished wood, it doesn't come off. The wood has to have clear coat on it.

If you have a small photo of him, you could get a local engraver who does Dye Sublimation to sublimate a photo on say a 1" x 1" or so FRP Plate or sublimation metal. I just did something similar on a...

It is a Reeves Drive. Just played with one yesterday....