I bought 2 of those yesterday at lowe's 99 dollar sale and neither make any noise I already had two more and they are silent also TAKE IT BACK
Type: Posts; User: Ralph Steffey; Keyword(s):
I bought 2 of those yesterday at lowe's 99 dollar sale and neither make any noise I already had two more and they are silent also TAKE IT BACK
I use the 2x2 rubber matts from Horror freight and I like them
Reg glat to hear your are getting your new shop finished. Maybe I can stop by for a shop tour this summer. I will be starting my new shop on the hill in june.
A good as in not been droped 4 foot level is good enuf to set jointer tables this is woodworking not metal working.
There should be a wire going in and a wire coming out of thr speed control just short across them and it should run wide open if it does then you know it the little potentometer
There are a couple of companys that make a framing gun just for this job. It is a special gun where the end of the nail sticks out of the end of the gun about 1/4 inch so you stick the nail in the...
when ever I use a dado blade on my pm 66 it seems to bugger up the threads on the arbor making it very aggrivating to put the blade back on I have to take a large pair of channel lock pliers and hold...
I put a link belt on my old delta 14 incher and it is the smoothest machine in my shop I think I will try one on my 20 inch Delta and see if it help as much.
Thanks much Corey that is it.
does anyone have the url for the bethleham supplyer of olivewood blanks
Shelly I have used the same set of Delta chisels for over 10 years and the only thing I have ever done to them is lap then on the outside with the scarysharp set up. I just bought a new shop fox set...
Hey Dev why is your saw listed today on woodweb for sale by some guy named Arthur?
The standard handicap ramp can be no steeper than a 1 inch rise to the foot or 1 in 12 so if you have 40 inches to rise your ramp needs to be40 feet long to be comfortable if room is a problem then...
Resin or epoxy will work but polyureathane is the right choice for cutting boards.
Jim you may be a bit confused about the use of the foot control. First if you really want to turn the motor on and off with a foot switch most woodworking companys sell a switch that you just plug...
John what you want to do will be fine IF you put a 1/4 hemp rope in each joint to compensate for the movement in those pine boards and 4 or 5 coats of poly(oil base) on top.
Jim the table looks great. Did you use the plugs or bondo to cover the pocket screws?
try www,constantines.com for your caining supplyes They are nice people.
Kurt I ordered mine in march and it just came in June.
Well my new 3 hp cyclone finally arrived off the slow boat from china friday and I got it unboxed and most of the stand built today. It arrived in perfect shape and I will post Pictures and a review...
Bill I have never had any luck trying to get the boards not to slip in the glue if I were you I would mill all my lumber at 4 inches,glue,joint and then rip to 3.5 on the table saw that way every...
18 gauge brad nailer is plenty heavy enuf and if you happen to hit a tile it won't hurt anything I also go back and caulk around the floor so this helps hold everything together. Just use a wet rag...
Jim I will be in Kingsport between the 30 of june and the 5 th of july I definately want some of that box elder e mail or private message me to make arrangements. Thanks Ralph
I agree with Lou if you pay attention to the placement of your lumber you will be fine with #2
I have a good one I will sell you cheep but I don't know how to get it to you I am in south Florida