Search:

I have also had problems with the new Kreg clamps, if the swiveling pads don’t contact the wood parallel to the surface they will not tension correctly and have to be retracted and reclamped.

If you cannot find it online I can scan mine

try a sawzall with a long blade dragging it backwards over the board

I heat my 2200 sq ft shop with 7 loops, one pump and balancing valves. I use a Munchkin propane fueled condensing boiler. My slab is 4" and has 2" of rigid foam underneath. The building is metal with...

I purchased a FS30 in 2011 from Eric Loza and have few complaints. There is no snipe, I use a 1 1/2 hp dust collector with no problem. The pork style guard is poorly made and when switching from...

Weaverville NC, just north of Asheville, I am making some wall cabinets for my office the photo with the panels was taken when we were putting the ceiling in my son's apartment We attached a grid of...

264916264917264918264919264920264921264922The lower level is uninsulated and has radiant slab for heat, my son lives on the upper level and it has spray foam insulation with a Mitsubishi multi head...

264884I have a Wilson cell booster that I purchased from Solid Signal it works well but I do not remember how much it costs

My workshop is a metal building 36'x72' in NC, the panels were heavy to work with and there were 6000 bolts that have to be tightened at least twice and they can be challenging to insulate but I have...

I have an FS30 and it has been an excellent machine, the Tersa blades give a clean cut and are easy to replace. I am in the market for a sliding TS and am considering a MM