The leak would be on the discharge side of the blower. Is the exhaust pipe exiting the blower sealed?
Type: Posts; User: Larry Robinson; Keyword(s):
The leak would be on the discharge side of the blower. Is the exhaust pipe exiting the blower sealed?
Hey appreciate the advise from all. Thanks for your input.
Seemed to have lost some power on my 130W Reci tube. Was cutting 1/4" BB at a speed of 23, now cutting at 19 with the same power. Have cleaned the mirrors. Just wondering if it is OK to clean the...
I have had my Weike for 5-1/2 years. 24 x 36 with an 80 watt tube. I upgraded it to 130 watts about 2 years ago. I cut mostly 1/4 BB. I got everything I ordered. The only problem with the laser was ...
I don't know anything about Versa Lasers. However, I occasionally have that problem when the cone underneath my lens is on crooked and it deflects laser to give me that same problem as you mentioned.
I have the HF Blower with 4" pipe/ flex hose. The suction side is about 20 feet long, the discharge side is about 4 feet. I also put in a gate valve on the suction side attached very close to the...
Nice to see how two different technologies can be blended together to accomplish the end goal.
I have a Shopbot and can not say a bad thing about them. Their support is second to none. You might want to visit the Shopbot forum with any questions or concerns you may have.
I would have to...
My laser came with wheels on it. Just took the crate off and rolled it into place.
Mark that is incredible.
I have looked at the many offerings from Stratasys, but the cost of materials and the post processing seems to make it unprofitable for production runs of the designs I...
I also have one, Delta type, and would love to see a forum on Sawmill Creek. I am sure it will be slow starter, but it is a booming market with a lot of competition in both printers and forums to...
I use about 30% RV antifreeze with fresh water. Just add water now and then. The pink color of the RV fluid also makes it easy to see the fluid level in the chiller window.
I added about 30% RV anti freeze because of the same problem. No problem with algae for 3 years. I would empty the system first and use fresh water with the RV fluid
What I did years ago was print on a thin sheet of white vinyl (adhesive on one side) and then laminate it with a sheet of clear vinyl that had adhesive on one side. Then cut to size and stick on our...
Would clear coating the wood before sanding help?
Sorry Marc, just cut it. Good new is that it is very inexpensive.
Try going to HD and get some "SandyPly" it cut very nicely, but not as strong as BB.
Well as others have said, depends on what you use your laser for. I do 99% cutting and I upgraded my 80 watt to a 130 watt and am so glad I did. Not just the speed, but less charring, and less heat...
I would make sure you put the mirror back in correctly. The concave side should be toward the work table.
Dave, Not sure what you mean by "pump current"?
I have mine set to 65% in order to stay under 26 mA.
Bruce, Mostly 1/4" Baltic Birch.
Having already been well versed with Aspire/V-Carve Pro with my CNC router, I use it for my laser as well and see no reason to learn another program. However, 99% of my laser work is cutting versus...
I bought direct from G Weike and all went well.
If smell is your problem, perhaps you might consider injecting some type of fragrance in to the exhaust line to cover the odor. I experimented with this last year for cutting Baltic Birch. It work,...