Search:

I have a Rockler one that i bought last year....overall I like the crisscross feature, the length is great, but the pockets are a pain in the butt. With no flaps, they fill with sawdust and get...

I would bet that the rollers are not parallel to the table. Also, I agree with Glenn.....my Griz has the raised shoulders he spoke about. They will prevent the wood from wandering outside of the...

I have the Grizzly version of that slider and it is exactly the same as the one at busybeetools. I have been very happy with its performance.

I have had the GO690 for about a year now. I bought it with the slider attachment and I absolutely love the setup. Dust collection is not awesome without an overhead hood of somekind, but I love the...

Totally agree. I make approximately 40-50 tables per year and that is how I do it.

I also had a Delta contractor saw and used it fir about 15 years. For the most part, it did what I needed, but I just wanted to go to a saw with more power. Going to a hybrid will gain you very...

I may be the exception, but I own a cabinet saw, bandsaw and planer....all Grizzly. All three were perfect right out of the crate (after assembly). I could not be happier with each. I am by no means...

I had a similar situation last fall. I ordered the 513X2B, only to find that it was on backorder then as well. I had done a lot of research, and decided to wait. I had been told that it would be...

I have both blades. A Forrest WWII and the Freud. Although I would say that when freshly sharpened, there seems to be little difference between them. They bot cut effortlessly and leave a very clean...

+1

I just used these pictures to install my unit....went on like a charm.

Thanks for posting this, Mike.

I am glad this turned out well for the OP. In the past year, I have bought a cabinet saw, a 17 inch bandsaw and a 15 inch planer from Grizzly. The cabinet saw purchase was flawless, but both the...

That syringe is perfect....I will be ordering one. That will also make it easy to see how much oil I put in.

Thank you.

I bought one on closeout from Lowes about 9 months ago for $200, so $275 seems a bit high to me. I will say, however, that I have been very happy with it thus far.

I bought the GO453Z.

Manual says to change it after 20 hours of use and then each year.

Saturday, I got my new planer down to my basement shop with the help of a couple of movers (made the process so easy). I started to go through the set up of the machine, including wiping down tons of...

I moved a GO690 table saw and a 513X2B band saw into my basement still in the crate. Right now I am awaiting delivery of a new 15 inch Griz planer that will also go down the basement. In each case, I...

One word......Domino

Me too. I have been very happy with Dynamic and they are far less expensive than Forrest.

How did you make the brackets? I really have no access to anything other than what I can make with plyers and a vice. I saw that unit and wondered if it would fit.

Has anyone installed a digital readout on a 15 inch Grizzly planer? I would like to install one, but not sure if I would be able to fabricate any parts needed to adapt it to the Grizzly.
Wixey has a...

Why do you need to do the whole piece at one time? When I make my legs, I generally cut the stock a bit longer than I need and joint them. Much easier than doing the whole length at one time.

Obviously, I don't know that they do what they say. I do however, request that the inspection be put on the order and I have a tech support manager follow up. If there was an issue upon arrival that...

My shop is in my basement. The access is via a bulkhead, so getting heavy tools (saws, etc) is a bit of a pain. To increase the likelihood of success, I always request that my tool be inspected and...

I bought the 513X2B in December and I am very happy with it. While some may disagree, I thought the step up to the X2B was an easy one. I love having the brake...the blade stops within seconds of...