I called it a style - it's the vertical section frame around a sliding vinyl clad window. To open/close the window, you slide it using the lip on the frame edge that I attempted to identify.
Type: Posts; User: BOB OLINGER; Keyword(s):
I called it a style - it's the vertical section frame around a sliding vinyl clad window. To open/close the window, you slide it using the lip on the frame edge that I attempted to identify.
I need to glue a vinyl window style to the inner glass (a strip about 10" long) where it has become loose. I was thinking of using CA adhesive. Is this a good choice or is there a better option? I...
I'd be concerned about trying to add glue to the open areas - excess glue might soak into the surfaces either side of the joint resulting in uneven staining.
Does anyone have experience with the low cost cell phone networks such as Puretalk or Consummer's Celllular that they'd like to share?? We've been with US Cellular for like 25 years, but the...
Last week I brought home about 12 boxes of solid oak flooring (3/4" x 3 1/4") which will be installed in our home. How long do I need to let this equilibrate in our home prior to installation?
Can anyone suggest a good top coat for an outside cooking station counter top that's open to the elements? It's made from Red Grandis. Thanks in advance.
Vehicle is a 2015 Ford F150 with push button starting.
One of our battery operated auto key fobs went through the wash. When I replace the batteries, it works for a few days, then goes dead. I've done this twice. The dealership said replacement cost...
FWIW - I find a belt sander occasionally works for me on certain applications. I have an older 3 x 21 Craftsman and a newer 3 x 21 HF. Yes, HF - made out of plastic, it is lighter and easier to...
Thanks for answers and suggestions. One thing I did yesterday was replace the PVC 4" drop to the lower dust port on the SS with a 4" flexible hose. Looks like I got tighter joint connections than...
I have the 3 HP cabinet model, likely for 6-8 years without checking. I love the saw - except the dust collection design. I have a Delta 50-760 with 4" PVC duct. I get a little dust collection...
Do you consider Tenryu better than Frued?
Right on - hot water supply at the using point takes a bit longer with the tankless system, but IMO worth it.
Most won't like this approach, but dump some saw dust on the spot, then saturate it with gasoline. Take a stiff broom and work into the oil stain.
I don't do a lot of turning, but this caught my eye. I've never turned green wood. I may have some green mulberry available and would consider turning a few ice cream scoop handles. If turned...
I sincerely appreciate the replies. I was a bit premature in describing the job as I just found out (by cell phone) that the treads are 50"+ and there are 2 landings to deal with. So, it appears...
I've been asked to make some stair treads for a daughter. Being ones available at the big box stores (oak or oak veneer) are too short in length, I'm exploring purchasing oak boards from which to...
I like pipe clamps as they are more budget friendly and very strong. I recently tried some 1/2" HF pipe clamps. The tooth-style holding feature didn't hold (on any of them), so I took them back and...
We put down Trex about 2 yrs ago when we built our deck. It was the most expensive of the options of this type of material. We are very satisfied. Yes, it's a little hot in dead summer - just put...
FWIW, I purchased 3 workbenches at HF and attached them together. I'm not sure, but I recall the cost for each was less than $75. Each had drawers, vise, laminated top. Works great for me. I...
My experience - buy the best (heavy duty) blades you can find. To me, blades are more important than the structure of knife.
FWIW, some normal, some not. I shipped a 25 box last Tues. from IA to Seattle, Fedex, scheduled to deliver last Fri., then rescheduled to Sat., then advised that they couldn't announce a delivery...
Rod,
Where can I purchase Varsol in small quantity? Is it sold under a different trade name?
Thanks.
Zac, I have the PCS.
Hi Zac,
I have the 3 HP cabinet model.