Search:

if you negotiate the document fee to zero you should have no surprise when some other line in the bill increases by that ~$500. What both you and the dealer should actually care about is the total...

Just a very beginning carver here, so I do what my teacher tells me to do-- which is honing freehand on a leather wheel charged with a green buffing compound. He has a grinder that he will use to...

120 to 150K miles on the ICE cars, 30-40K miles in my F350 that gets driven fully loaded-- 24,500 lbs, often in hilly country. I've touched the brakes maybe three times in the first year of owning...

OK, I get it. Just trying to figure out what I did that was wrong, especially since I went to the trouble of getting a non-paywalled link so that people could read it. It appears quite mysterious if...

I recently posted a new thread containing a link to a newspaper article about impending rule making with respect to table saw safety features in consumer products that I found interesting and highly...

AFAIK, metal boxes need their own ground, independent of the grounding on the outlet. Typically done with a pigtail that is screwed to the box and than wire nutted with the ground wire coming into...

Steel wool after it's dry!

My first use of RM was on our curly maple kitchen island, which gets seriously used and abused (though not cut directly on)-- lots of water, foods that stain, and black iron stains from my pans and...

I've never tried veneering both sides at once other than with a two part form-- which didn't go so well. I've used a bending form or the actual interior structure of the bent piece on the inside and...

This thread begs the question of why 4 x 8? When and how did building in the US standardize on doing things in 2 ft increments with 16 or 24" spacing? There's no indication in older houses that the...

I found that the Grammercy brushes for waterborne finishes made a huge difference in my ability to use these finishes (mostly Emtech products for me, including some of the "spray only" versions for...

It's hard to make a specific recommendation because the products available change very quickly, though they are all basically the same. I used a "bullet" or "spy" camera from Amazon with a small tube...

Last year my "local" hardwood supplier (Highland Hardwoods in NH) had very nice curly walnut in 4/4 and 8/4 boards for $15-17/bf. Nice, but not spectacular-- not as dramatic as the ones in your...

My podiatrist, who sells a fair share of witchcraft in his practice, says he won't do it because it doesn't work. I'm inclined to believe him. The only proven approach is systemic antifungal drugs....

I understand that violin makers use sodium nitrite and UV or sunlight to "tan" maple prior to varnishing. I have no experience with that, but might be worth a look.

Another vote for Adblock plus. It gets rid of an enormous amount of junk with very few downsides.

It's currently with Hanover. Might have been Geico at the very beginning of that period, it's been Hanover for at least the last four years. My agent shops it around for the best provider every year...

I hadn't thought about it for quite a while, probably because it has been unremarkable. I checked and our homeowners policy has increased a total of 8% over the past five years, something like 1.5%...

If you fix it it will show up on Carfax as having been damaged and repaired degrading your future value. I don't think repairs done prior to delivery show up that way, but I might be wrong. I think...

Best curly maple I ever got came from a mill around the PA/NY border decades ago. It was way up a back road, I've never managed to find it again. I asked about figured maple and they said "oh yeah,...

Pretty much every piece I made is done with at least some figured maple. It's about my favorite wood. I'm glad I started using it before I found out that it was impossible to work with ;-) This...

Here's a map of soda vs pop vs coke usage in the US.

516917

Making a handle to fit your hands might well be a fun project. No reason to stick with what the manufacturer gives you or what someone else thinks is a nice shape. I've replaced many tool handles...

To mask red add green. So in choosing a dye or stain that is already some kind of brown pick one with a greenish tint to try. Brown is what you get when you mix red and green, so what you want to be...

Just as in baking and cooking, measuring by weight is now faster, easier, more convenient, and more accurate. I have no idea why people mess around with liquid measures (especially of thick, sticky...