Yes it is You can use the planner to strip of your paint.
But you need to make sure you cut deep enough.
Use the heavier one to get the fast result.
Good luck
Johannes
Type: Posts; User: johanes purnama; Keyword(s):
Yes it is You can use the planner to strip of your paint.
But you need to make sure you cut deep enough.
Use the heavier one to get the fast result.
Good luck
Johannes
The paint cannot help if the wood is moving.
A paint is just a thin layer. It wont be able to withstand the wood movement.
What you you can try is to finishing for all the wood surface, so there is...
Maple is quite difficult to be colored. It is easy to get blotchy in the staining. You need to make sure that you did good sanding before start the stain application.
Do you have facility to do...
Please click one of the Quick Reply icons in the posts above to activate Quick Reply.
You need a antique finishing on your table.
It need some special finishing techniques such as distressing, and a spetical technique of stain and glaze application.
This is a link that you may...
A stearated type of sandpaper (white sandpaper) should be used for sanding sealer or lacquer on the flat surfaces. The grade you can use 280, 320 or 400. For no flat surfaces you better use scotch...
No you better don't tint the wb lacquer with water based stain. It totally different materials.
You better apply your stain to get your color and then apply your wb lacquer.
It is more easier in...
Oak wood has a nice grain and pores.
With proper finish you can make a nice product.
Many finishing models can be used for this wood with very good result.
You already know the process. What you need to do it try on a piece of wood to get the result you want.
I prefer to use lacquer (nitrocellulose clear coating) to do this finish, since it fast and...
For calculation the pressure and volume for your HVLP gun, you may view this link.
Compressor calculation for wood finish
Good luck
Yes agree with Scott.
You need to strip the finish on your table. And start to do finishing process.
Just make sure you sand your wood well to remove the sanding mark in there.
I think you can get...
I always try to wash off the paint with acetone or thinner. If it works it will lot of easier to do.
If the paint is difficult to stripped of with thinner, then I use paint remover.
Stripping...
You can try to rub your finish to fix your problem.
Use 400 grade sandpaper put in a hand block to sand your finish. sand it until all your nibs is gone and you get a smooth and even surface.
After...