Search:

Thanks all for the advise
I just picked up my planer. Winfry Electric a local rebuilder worked on it for me
Took the motor out rebuilt it and reinstalled it
They did a bit of rewiring in the...

Thanks
John

Thanks Ron

Got the beast to an Electric Motor Repair Shop.
The old motor is shot. Are there replacement motors
that will bolt on to this old iron? Will get a quote on a rebuild
tomorrow, when i go to pick...

i did carry the planer into Anniston. Motor is shot

Thanks

my old FB 12” planer tried to start yesterday spun slowly then quit. I let it cool down but it has never tried to start again. Thinking starting capacitor. Pulled off the rear cover and it has what...

[QUOTE=Bob Vaughan;2828605]Obviously an interruption in the flow of electricity.
Usually the break is in the motor starter. What kind of starter are you using? It makes a whopping big difference...

I have a 985,
Jim
I was planing some 1x2 maple strip for picture frames. The unit stopped like it had been unplugged. It did not feel hot nor smell hot. Any clue what
's going on with it? I havent...

Rick Potter I am interested in using it as a sanding drum with the "kit" from Belsaw. I am considering making a sanding drum to attach to woodlathe if this is a less than ideal solution

Anyone have any experience using a Belsaw 985 joiner/moulder with the sanding option?
I guess like a drum sander option?
Thanks
Tom
Alabama

I bought a belsaw 985. I think it can be used with a drum sanding option. Anyone have any experience with that option?
Thanks
Tom
Alabama

Check landfills for wood.I have found alot of usable wood at ours. Watch for roadside piles waiting on pickup. (Not every community has roadside trash pick-up). Listen for chainsaws when riding...

Did you get 1" posts? or the size that comes with the 0766? (Can't remember the dia)

do most systems nowadays have the laser option?

Thanks Steve
That's something I had not thought of

every youtube video I watched on making zero tolerance inserts
places the cut/slot in front of the blade.
https://www.youtube.com/watch?v=RI4PzUamKzY
https://www.youtube.com/watch?v=OvJq_aE7JEw...

I have a Rikon 10-325. I am planning on making or buying a new insert. I see that everyone seems to put the "cut" in front of the blade.
I assume that is to ease blade changing. Is there a reason...

David that's about 2.5 hours from Eastaboga. Where in Cleveland, I would be coming up 59 to 24 (?) from West side i think
I'd be willing if you have time to show me your 0766.

My money is here and i want to up-grade from my Midi. I live between Birmingham and Atlanta.
I can travel a good ways if necessary. If you are willing to let me see you and your Grizz in action I...

The Park Rangers from Cumberland Island National Park (coastal Ga) said "ole Ironsides" made from Live Oak

I use the oneway talon chuck as well. I use a recess and tenons for various reasons. I learned using a tenon though. My Talon's jaws are not tapered. If you use a tenon be sure to make the tenon is...

Dale would a base plate that was increased from 14" to 16",18" 20" etc that had a slot or series of holes make it capable of "steadying" larger diameter vessels or bowls? Is the height also a...

I am currently saving towards a Jet 16 X 42 EVS-2. This Grizzly model looks to match or exceed the Jet's specs, for $1000 less?!?
(I could buy a nice BS with that grand!) This seems to good to be...

There are so many "Nut" cases out there I would not chance it.A lawyer can sue wither the facts are on his/her side or not. They make millions from nuisance suits

Charlie,Dan and all
He is asking me if it's worth anything. (He's not a turner)
I doubt he could do any real nice blanks, just sell the green burl