any idea what the price point will be on something like this?
Type: Posts; User: Justin DiValentino; Keyword(s):
any idea what the price point will be on something like this?
Yea I havent been thrilled with this saw but I got it for free and need too many other things to replace it. It also came with a nice vega fence which makes it quite usable.
I did tear it apart...
instead of doing mortise and loose tenon you might want to consider a system like the amana stub spindle which integrates the tenon into each of the rails
...
This is actually my next project, only my plan is to make (2) full radius arch doors and their cooresponding frames. Cheapest price I found for a pre-hung arch door was $600. I'll easily beat that...
So I turned this thing over and adjusted the trunnion so the blade is dead on with the miter rails.
Problem is the blade wobbles too and fro as the height is adjusted. At first glance, there does...
Found a nice used (obviously) one for sale in decent condition at a decent price. This thing looks like its moderately sized enough for a small shop, yet still heavy duty to last a long time.
But...
Problem solved, thank you john. What I didn't know until now is that in order to get 220 you need 110 from each leg. The box is setup with two slots from each leg alternating as you move down the...
OK just went down and checked, Im getting 120v from each hot line to the ground. Nothing between the two hot lines (though i dont know if Im supposed to) either way the jointer is not firing up and...
breaker has not tripped. I've never seen it happen but could it just be a bad breaker?
I do have it wired that way, the picture is slightly off from my actual recpt. I shouldve been more specific in the original post
Let me start by saying I've wired countless 120v circuits/lights/rec, etc.
I just got done with my first 220v receptacle and its not working. I am using a standard NEMA 6-20 250v 20a receptacle. ...
Both of these look good, what do they go for on the used market?
Overall, I probably would not spend more than $1500. But I would rather spend less and buy a drum sander which I also need unless you suggest some absolutely amazing planer which will last me the...
I'm starting to think about adding a planer to my shop. I would like something I can be happy with for a long time to come. I have not set a budget just yet because I want to keep my options open....
I thought that seemed high. Its a 1.5hp motor. I did find a GE THQP 2x15Abreaker on amazon.
Just picked up a G1018 8" heavy duty jointer off craigslist for $400, not much of a gloat, but jointers are scarce in my area, especially 8"
Anyway...
The jointer came with the original manual...
I dont think Ive seen torsion box mentioned yet. I was under the impression this was the best way to get a flat surface thats resistant to sagging
...
Im just starting to get into some more challenging cabinet and wainscot projects and I am very interested in a particular style. Essentially, its a raised or flat panel set inside a typical...
Hi all, first post here, though ive been lurking for a few weeks.
I'm in the process of putting together a shop in my basement, and I'm basically starting from scratch. I gutted all of the ~40...