Search:

Check out Grizzly's D2258, should be exactly what you want

I own a Grizzly G0555Xl, I do resawing and all the normal stuff. No problems with the machine, and has not bogged down yet with anything I have feed it with; Sapele, Maple, Ironwood.
I will attest,...

I have both a Dremel and a Fein. I bought the Dremel as I thought I would only use it once in a blue moon. I used all the time, enough to wear it out. It lasted me a few years. So I bought the newest...

I guess this is the right forum for this post. I am so impressed with this file that is not a file; I wanted to share it with those who have never tried one.
300075
While looking through a Lee...

I agree with the miter, if you can split the thickness you can make a book match joint. Just make sure you figure the exact lenght need for the miter cut, and lay out the wood before cutting the...

Ernie, I do appreciate you comments. I have been careful building this thing so far. As I live in South Florida I humidity is also something to think about. So before final cutting and gluing up I...

I have read on a couple of harp makers sites that the spruce soundboard start cracking as they age. Where as the laminated sound boards hold up. I did not make the statement, I only repeated it from...

Yes, George, I did read your and appreciate you post. I have read everything I could about all the harp makers. I have viewed a full tour of Lyon and Healey building production. The builders normally...

I check out the test report for glues as Dominic suggested. The epoxy was stronger at 1700 and the liquid hide glue at around 1400. I really would like to use the liquid hide glue because the sound...

I am building a 36 string harp, I will be gluing a spruce soundboard to the soundbox. My question is if I use hide glue, will it hold the 1200 lbs of tension? Or should I use plastic resin glue, or...

If you bond the plywood to the granite the granite is actually supporting the plywood. The granite stops the plywood from bending, not the other way around. So the plywood is really only there to...

My two cents, Festool is what AGE tools were 45 years ago. I still have all my AGE tools working, without any repairs needed. If you can afford a Festool get it. I hate spending the extra money for...

I am building my first instrument, a cuban mahogany with maple core 36 string harp. After all my reading, I am confused. With today's technology is sitka spruce equal, better or worst than using 5...

I just bought the G0715P a few months ago, the largest/hardest material I have worked with is 8/4 x 120" x 10 " hard maple, no problem, works perfectly. I like the saw very much. Added a shop made...

I made a hinged table extension, it hinges off my router extension with 2 t tracks running 90 degrees to the saw blade. These tracks allowed me to make a fence that that cuts 32 to 52 inch goods. I...

Well I built the cabinet shell with the scissor jack, 12 volt motor, works very well. The only thing that I am not thrilled about is that the last 1.5" of upward travel is slow, because of the way...

In the motorcycle business, if it is not running I don't buy it. Else you are buying a "pig in a poke"

I get most of my exotic wood from a place called MR marine wood in Stuart Florida. The lady there is named Rose. Since she has much of my lumber shipped in, I am sure you can have her drop ship to...

When living in NY I heated my garage using the heat from the burner room and transferred it to the garage. I used hot water baseboard elements and a tiny circulator pump, similar to one used in a...

The saw weighs nearly 50 lbs, and is longer in depth than those lifts will handle. My saw is the LS1013. And the heavy hydraulic lift table would work, but I cannot figure how to get it into the...

So after a week of thinking, I am going to try my hand at building a electric lift table. Already ordered a 12v car scissor jack for the lift. If it does not work out I'll go with the flip table in...

If you tune the saw correctly, use a 3 tpi 1/2 or 3/4 it will do the job correctly, I have the the LX and use it for resawing exotic wood, such as Shedua, purpleheart, Santo Mahogany. Works great...

I looked at the video on Google that Bob posted the link for. That guy has the same saw as I do and it does not look like it would be too heavy for a flip top. He made his top lower than the counter...

Roy, now that looks like it may work, I don't see how the foot pedal works, nor how the top swings. Do you have any photos of your cabinets in operation that you could post. Do you think that the 47...

Rich, If I understand you correctly, the saw is mounted a few inches higher the the top of the counter top. Allowing you to slide the sheet goods under it. The C brackets bolt to the underside of the...