Any suggestions for other sources????
Thanks
Pete
Type: Posts; User: Pete Shermet; Keyword(s):
Any suggestions for other sources????
Thanks
Pete
Looks like these things are as rare as hens teeth!!!!LOL
Hi all,
I don't know if many of these made it south of the border but I'm looking for a manual for a Rockwell 1900 sanding centre.
OWWM has pictures of rebuilds but there is little else on their...
287069287070287071I used Flecto Diamond Satin Water based finish and it has held up well and the colour of the wood is almost the same as if you wet it! so if you're curious take a damp cloth and...
Roxul all the way man!!!! Easy to work with, I still use a mask and long sleeves but not even 1/8 as itchy as fibreglass. put it in my daughters main floor laundry room before it was drywalled and...
Count me in on the Bandsaw draw please, I don`t think Santa will bring one!
The remotes may have internal dip switches , if so change the dip switch settings on one unit (both remote and receiver)
And you didn't even have to use a gun!!!! LOL Congrats!!!!
For longer periods : Boesheild T9, this works great http://www.leevalley.com/US/wood/page.aspx?p=50252&cat=1,43415,43440
But you might try the plastic and a desicant pack, don't let the desicant...
I'd love that bench, please count me in .
Regards
Pete
Count me in Please
Regards
Pete
Is it possible that the ~8" high drum with the air ramp was installed upside down???? this is the piece that the outlet from the blower would connect to, usually a plastic bag on the lower end and...
Please count me in and select my ballot as the winner!LOL
Thanks
Pete
I suspect Illinois gets its fair share of cold weather in which case you should provide the area with make up air if you intend to exhaust outside.
If you have Forced air gas or oil heat the...
This is one of my pet peeves!! and I blame it on the mills not the moisture in the lumber. some mills are just plain ripping the general public off, in order to get more lumber out of the logs! You...
The only screw I use is Robertson, I threw slot heads all away years ago, that being said , if your driver bits are worn and you use a drill, to drive them they tend to ramp up and will slip and...
Please Count me in , Thanks!
I'm a firm believer that one mans trash is another mans treasure, (I'M usually the other man) but it is getting harder and harder to get parts for certain things.
Regards
Pete
try
www.batterybuyer.com
I'd like to be included
Thanks
Best Regards
Pete
You mention that you vented it outside. IMPORTANT NOTE of you're in the north (cold climate) and have gas appliances (furnace, water heater, dryer) the negative pressure caused by having the dust...
Please Count Me in, They are awsome!
These guys used to be in my home town of Milton Ontario Canada, They were great to deal with but have now moved away:
http://www.greif.com/
Good Luck
Best Regards
Pete
Grounding the PVC will prevent the static build up and possibly a large static discharge which would be most uncomfortable if you were the recipient, it will also prevent your pipes from accumulating...
You might try these guys,
http://www.batterybuyer.com/
I got two 12v for my Ryobi torqueforce as they had been discontinued, the cells are top quality and the battery's cost me about $25.00 EACH...