John,
I was in awe of your excellent workmanship of that one gorgeous door! In addition to, the finish the color, and superior fore thought. As to the removable panels for the possibility of...
Type: Posts; User: Ed Edwards; Keyword(s):
John,
I was in awe of your excellent workmanship of that one gorgeous door! In addition to, the finish the color, and superior fore thought. As to the removable panels for the possibility of...
Hello Nick,
Is the tracking concern with one brand of belts, or all, old or new? I've never had an issue with Klingspor or 3M belts.
Ed
Keyless entry
I'm not sure of other vehicle manufactures, on my Ford pick-up, once I unlock it, or, remotely start it, I still need to insert the key and turn it to the on position before the...
To Rich and to others viewing this thread,
the following post does not represent an indorsement, nor as a critique of the following brands. Ed
Home - NOVA
www.teknatool.com
The company that is...
Mark,
Have you taken a look at ebay?
Vintage Lion Miter Trimmer Universal Cutter no.4 Pootatuck Corp Shelton Conn
https://ir.ebaystatic.com/rs/v/tnj4p1myre1mpff12w4j1llndmc.png 1 viewed per hour
Tyler,
I certainly like my Forrest blades even if they are at a premium, both price wise and an availability concern. Earlier I used an Amana rip blade and had no problems with that one either....
Tyler,
Give these guys a look for Forrest blades www.sliversmill.com
Ed
Eugene, found this at Amazon, same gun?
List Price:
$60.00
The only thought I had was...
Where are you going to go with a 50 foot extension cord?
Ed :)
Mike,
Try these guys.
Sorry it downlosded so big
Ed
StampingBlanks.Com
Drill Bits
Rod Sheridan's second post says it all
Ed
Andrew
Are you interested in a specific warranty or guaranty? The following maybe helpful, of course the best answer(s) may be better served by counsel.
Ed
DefinitionsWarrantyIn simpler terms,...
I was just surfing the net when I came across the MATCHFIT Dovetail Clamps for the first time. I don't think I was under a rock for any length of time, BUT??. The concept is very interesting. Not so...
This is the BEST I've found Pro Classic
Homeowners \
Paints & Supplies\
ProClassic Alkyd Interior Enamel and if you hurry 30% or more off. Look at the at the other coupons below. Ed
Nick jointer dilemma
If you raise the arbor bearings you will only exacerbate the condition. The cutter head has to go down or the outfeed table needs to go up. The reason for the snipe is that...
Preppin' Weapon another comment.
As others, I have multiples with a different grit on each one. Two great advances over the previous 3 M rubber blocks I've used.
#1 they have the correct...
I agree with Lee and Ben verify the right size and style of the bolt. It wouldn't hurt to use a liquid spray to soak it. And as a few have said, use a hand impact. Pretension the wrench to the left...
It's just like saying "I have no skin in the game"
Ed
Here are the responses from "the creek" from 2013.
Bill NG does a great presentation on his site, as well as the 5 cut method. As was said earlier.
Ed
I usually use 1/2" Baltic birch for making ZCIs. Four set screws with a little glue holds them. For retention I use a small round screw, again with a little white glue to prevent loosening through...
Thanks Tom Bain!!!
So many times I've seen posts that the author must think all readers have an infinite knowledge of all acronyms. Not knowing what it is, I waste time going to Google and...
I'll ditto Bob H's recommendation for the MetaboEd
I noticed a small amount of flex at the rear end of the Unifence when 3/4" 4x8 plywood.
All I did to correct the concern was to after setting the fence, I clamped a wood block to the back side of...
Router ColletThanks a lot for all of the responses!
A friend and I were kicking around the question, other than high humidity possible causing rust, we just wondered.
What a GREAT place to get...
Hello All,
I'm sorry I posted this in the classafied area by mistake.
What are the pros and cons, if any, for leaving a router bit chucked in a collet for an extended period of time ?
Thanks,...