Search:

I wish to use a pc of 1" 8tpi all thread to make an auxillary shaft for my wood lathe chuck. I wish to use a length of 3/4" crs for the main shaft,2" of all thread. Previous attempts have resulted...

I have some ballushings and I would like to make a carver similar to Terrco's T110. I need the following measurements: height of steel uprights,length of the sides,width of the frame(back bar) and...

I have some components left over from an overhauled carver and wish to build one similar to the T110. I like to ask a contributor to give me the following measure meaurements: width of front ,length...

Do any of the captured hollow form turning arrangements have a pattern guide to be followed to turn the inside of the work as to the same contour as the pattern? Seems like there should be, as the...

I'm sure thats true,but I beleive its the safety factor. She indicates running a 3 jaw chuck at 2000 rpm at demos,is kinda begging for problems. My question is: after parting the top from the bottom...

Thanks for the tip,I've made a threader-works good too. I enjoy it so much,but it would be easier if it was part of the lathe. Mine is a separate. I was reading Bonnie Klein's write up,she now...

Looking for a box threader,short turning tools(long beveled gouge, and pointed scraper), or Baxter threading device. I'm asking because new,these are beyond my economics.;)

Thanks Art for your response. Yep it would be better to use ballbushings on all axii, but for cost ,it looks I like I would choose the Gemini wheels for the back and forth(x aixis?). Its the gantry...

I would like some inputs on making a new carving machine. Would you chose the Gemini design,the North star type, or? Ballbushings for the cross left and right movement, and wheels for the length ?...

I have a question on machine carving. I have a terrco duplicarver and a gent wants to commison me to do some chair repro carving. It will entail tudor roses ,vines, and grapes. I would appreciate any...