https://pennbigbedslate.com/
Type: Posts; User: Bob WrightNC; Keyword(s):
https://pennbigbedslate.com/
I've not cut mdf on my machine as of yet and started doing a little reading on the subject. Is sourcing MDF an issue, as it relates to resin used, formaldehyde, other possible toxicity/production...
Lots of good answers. Thanks to all!
Just wanted to check on any advice on what solvents, if any, that you guys would use inside of your laser cabinets to clean residue. Didn't see any threads on the topic, understand certain chemicals...
The blast gate is a good idea. It's been particularly humid this week in NC and, while the thermostat is set to go up at night, it's still not enough to compensate. I've resorted to leaving the top...
Anyone else walk in to see the inside of your laser wrapped up in condensation? The vent to the outside is creating real moisture problems in the cabinet when the AC is wide open. Leaving the lid...
Talked to a shop owner about a month ago that was telling me about going to the retail gift market and buying some product with licensed logos on them. She bought six of these items. Turns out the...
I thought Corkcicles would slow down too Mike but they keep on rolling.
A quick google of chinese yeti cup takes you to a selection of vendors that sell knockoffs from China. On DHGate, you can buy a 20 ounce with Yeti labels and at least identical looking to the yeti...
Trotec is also opening quite a few Training/Demo centers where they have machines that you can demo besides at a trade show. You may want to contact them and see if there is one near you. Get a...
It's the cone one Steve - did call tech service and they said noise was normal and didn't need lubrication. It has made that noise since the beginning but I swear my first instinct is to grease...
There is a difference between building a machine, supporting it versus using it every day for a living. From a practical standpoint, there are a few people here who know quite a bit about these...
Rotary making some noise(really has since the beginning) and haven't begun to lube it - thought I'd ask someone with more experience on the how and where. Thanks in advance.
And how did you engrave it/achieve the white logo? With a fiber? Or is that just the paint engraved off with a CO2? Thanks.
Wow, that means quite a few people have fibers - had no idea. Thanks Kev!
I've seen these on some websites and was wondering if these engraved with the white finish you see so often. Looking at these for some family members and didn't know if someone had any experience...
Well, after talking a big game, I decided I too needed to be a contributor and at least put someone in the ballpark if I can. I tested pretty extensively and would love some feedback from some of...
My experience is exactly the same on Win Pro 7 with X7. Still using X4 for everything and checking back after updates to see if anything changes.
After looking at all the threads on the board on slate, you can see power/speed/dpi going from 100P/8S on a 80 watt to 34P/100S on a 40 watt and dpi from 600 to no higher than 250. That's a pretty...
Dan, I'm looking for a good mark, not necessarily the deepest. I'm engraving for clients that will want personalization, no color fill. So that's my goal. Running that slow at full power, I got a...
Cruising through previous threads, you see recommendations for slate all over the board, from the low power high speed, to high power low speed. I tried the high power slow speed that Keith Winter...
Thanks Gary. One thing I have noticed is that the settings on the same machine can be drastically different from a similar machine, same wattage. I'll run a grid and see what "sticks". Thanks for...
So you're saying that the Cermark will stain if you leave too long? I'm going to paint on and then laser. Mind if I ask what settings you're running since we both have the same laser?
Also, did...
Got some nickel plated products I want to mark and was at ISA in Orlando last week. Topic of which to use - 6000 versus 6060 for marking nickel plate. Anyone had experience with these? Settings? ...
Neville, one of the members here told me about running the job at a much lower power and doing it onto blue painters tape. This gives you the benefit of both seeing where it is and also seeing how...