Search:

Here you go, they cover Chevy and the GMC Sierra. silveradosierra.com

I have found with my Canon cameras(EOS 40D and 7D) that the Canon software needs an interupt or something to let it know that the camera is there. After I get the camera connected and the software...

I've never a problem with Purple Heart turning brown or any other color. My use of it has been small, making picture frames and trim.

I made a frame from Purple Heart for my son's college...

I wouldn't worry about it, most likely you will never have another problem. Had a Dodge Dakota pickup with V8 and auto, put 145,000 on it and the only problems were starter motor at 55,000 and...

I did it and loved it. The B-17 Liberty Belle was here last June. Believe they were charging $430 at that time. Wife told me to consider it my father's day present. Once you were in the air you could...

I have 2 5615 routers. there was about 18 months between the purchase of the first one and the second one.

The one I got first is mark "Made in the USA", the second one is "Make in China". They...

Years ago when my oldest graduated from college I made a frame for his diploma using oak and purple heart to match his school colors. The oak was stained golden oak as his school colors were gold...

I have 7 or 8 routers, 1- Bosch, 2 Milwaukee 5615s and the rest are Porter Cables, 690s and 1 big PC for the table.

I was using PC 690s for the Leigh jig but my results weren't always good. ...

Guess I'm just lucking as I have a frame that I made from Oak and Purple heart for my son's diploma. School colors were gold and purple. He gradated when he was 23 and he's 38 now and the frame...

I agree with the other two, you need more compressor. I do a lot of sand blasting as my other hobby is old cars, in fact tomorrow I will be sand blasting the front sub frame from a 68 Camaro.

I...

These batteries should still be available. Go to Sears.com and click on parts, then enter the model number of the drill. You will get a list of available parts for that drill which should include...

This comes up every now and then. For about 15 years I used nothing but a left tilt saw and then about 10 years ago I had a chance to buy a new right tilt Unisaw with 52" fence at a very low price. ...

Steel City Tools are made in Taiwan.

Bob

Well my 2nd saw just arrived and it's worst than the first one. The box is beat all to hell, the cover is off the back of the motor with all the wires exposed, the safety button (switch) on the...

That's the same damage that my saw had. Like something heavy was dropped on the box causing the head to go down cracking the casting.

My replacement is supposed to arrive today. Hope I'm lucky...

My Makita LS1214FL sliding miter saw was also damaged. Where the stop that controls how far down the blade comes, well where that stop meets the frame, the frame was crack all the way threw.
Called...

I also had an estimated delivery date of Mid March. Amazon usually sends an e-mail when they ship an item, no e-mail so far so I guess it hasn't shipped.

Bob

The wood is outside but is in a protected space, no rain etc. The wood is stack using 1" sq stickers so that air can flow between the boards.

Bob

I have about 150 bd ft. of Walnut that I'm air drying. It's 5/4 and has been drying for about 9 months now. Checked a couple of the boards yesterday with my mositure meter and they read 14%. How...

I used a left tilt Craftsman for a lot of years, then about 8 years ago I puchased a right tilt Uni. After taking a few weeks to get used to it I liked it. I'll never go back to left tilt. I don't...

I used 5- minute epoxy to fill the knot holes. Right after I mixed the epoxy I spray some black paint into the mix. After I fill the knot and sand smooth I have a nice black knot that isn't going to...

For the lift I would recomend the Jessem MastRLift. It is designed for the PC 7518 and works great. I have one for my 7518 and am very pleased with it. This lift allows you to change bits from...

Thomas,
First let me say there are many different ways to do the same thing in woodworking. The side table that I added to the Unisaw for the router table is 27 inches X 48 inches. My router (PC...

My setup is the same as Bob's above. I have a right tilt unisaw with 50" fence. Have the router mounted to the far right (about 14 inches from the end of table) and I stand at the end of the table...

Maurice, Your door looks good. I really like it.

Bob