I have the same moulder as you. Bought my on clearance. It has paid for itself with some millwork jobs already. I also bought the guide system from W&H it fits fine on the moulder. I use a scrap...
Type: Posts; User: James Reichman; Keyword(s):
I have the same moulder as you. Bought my on clearance. It has paid for itself with some millwork jobs already. I also bought the guide system from W&H it fits fine on the moulder. I use a scrap...
Creekers I'm sending out the call for help. I scored alot of Blum Tandem plus drawer slides. Pairs, and in various sizes from a shop that was closing up. I have never used these slides. I only use...
Tip a cold one to you. Norm. Enjoy your retirement. I will watch all the re-runs with just as much interest as I had when they were new.
Well I came across this ad for a cabinet shop going out of business not far from me. They where selling everything and the sale began today. I got there a little early and was the first one in.
So...
Well can you do a custom knife set up? Maybe build a box around the machine with an alternate tensioner futher of from the out side of the open end of the machine? Make say the 6" pass first. Apply...
Nice work! I'm sure he will love it. From a VET, to your son. Thanks For Protecting our Freedom!
James
I buy all my cutters from W & H. and they work just fine in my shop fox moulder.
I love the Kreg system on my mitre station.
Bob can you PM me with the mill contact #. I would be willing to take a ride for those prices.
Thanks
James
I have them back to back. My slider being feed from the door and my rip/dado saw in back a 12" table between attaches the two of them I made it from melamine so it take wax well.good luck
I have a mini max sc3. Picked it up for under 2k. It will not take a dado head. So instead of building an outfeed table. I watched CL for a used grizzly 1023. Put it in front of the SC3. Back to back...
Thanks for the tip. I'll give it a try
To the OP enjoy the fence system I love mine.
Happy An Healthy New Year to all.
James
I made my fence out of 1 1/2 mdf .I cut a 3/4 d x 1 1/2 w rabbit . I was able to screw through the kreg track and apply it to the mdf fence. Then I put the rabbit on the edge of my boxes and screwed...
On my saw the top of the fence is flat. So I was able to cut the tape at the begining of the T track and use the rest to run on the saw fence. However the stops cannot be used for that 11 or so...
I have the Kreg setup on my mitre station. I used the heavy duty T-track, the flip and solid stops. The left side is 8' and the right is 4'. I love the setup and the adjustment is easy if you use...
I would not use the full dado set. I have no experience with that saw. I know there is a RIDGID site with a woodworkers page and a search feature.
I'm kinda cheap so I buy the Freud Box Joint set....
Would you consider just replacing it with a new one from grizzly? The reason I ask is I just did a bearing,arbor,belts complete with all the other associated parts and the price for the new...
Sweet! Post a completed pic of the box. What type of joinery dovetail, box joint?
Thanks for the help guys. Jim I was thinking of cutting two parallel slots in the top to mount the fence. That would give me my depth of cut adjustment. I was thinking a 1 1/2" or 2" solid mdf top...
I just built a bench similar to the one Norm built. Just changed the dimensions a little. I have a small shop (20x20). I was thinking of maybe incorporating the router with a lift into it. Maybe a...
I'm lusting that machine as well. Please post a full review. Also looking into the 10" model due at soon.
Mitre saw for any trim and mitre doors. My saw is an Omga Mec 300 st. Cuts perfect every time.
I just read and older issue of "This Old House". They had a kitchen in there that was a farmhouse green color with knotty pine doors. the center panels where a bead detail and there was a wall of...
In the spring a local cabinetmaker who I do some installation work with closed his shop. He was moving into the shop I work at a few days a week. Kinda like a guild.
Well I was fortunate to be able...
I buy my knives from William & Hussey. There are some cheaper out there but I think the quality is worth a couple of extra bucks.