Yeah Jim, I've spent the better part of a day spining that plate on the bottom of my router but there just isn't any possible way to align the holes except as I've already described. I took pictures...
Type: Posts; User: Jerry Crawford; Keyword(s):
Yeah Jim, I've spent the better part of a day spining that plate on the bottom of my router but there just isn't any possible way to align the holes except as I've already described. I took pictures...
Jeff - IMHO, I'd place the casters under the planer corners and not at the ends of those wood spreaders I see in the mock-up. IMHO the weight of the planer will pull that joint apart and eventually...
Ahhhh, yes Jeff, but you know as well as I do how much satisfaction you'll get looking and using the finished tool. For those of us who have been this path there's a satisfied feeling the uninitiated...
I just recieved my Unilift from Woodpecker and ordered a special plate for my Ryobi RE600 plunge router. The lifter installed in the table perfectly but when I tried to install my router I discovered...
Bow saws are very adaptable for cutting cross grain and can use several width's of blade for curved cuts where a traditional hand saw can only cut straight on lines and you need a coping saw for...
No - I ordered the one above from Woodhaven.
OK - you talked me into it. This isn't the first router I've dropped into a TS so maybe the old experience will work for me too. I really do know how to do this - it's just sometimes I need a jolt in...
Good suggestions Jamie - Thank you
How do you account for the lip on the inside of the cutout for the plate to rest on?
I'm debating about ordering the Woodcraft Unilift but agrivated about having to also spend another $35 for a tremplate and router bit to cut the plate into the table. Anyone like to get some of their...
Thank you gentlemen - product located and ordered.
Yeah! now we're cooking. This Woodhaven stop looks close to the item I had in mind. Looks a llittel like th Kreg too
http://img.photobucket.com/albums/v305/JerryCrawford/Redflipstop.jpg
What...
nope - it's not an Incra product. Everything they make is a function of other stuff with their name. But, thanks
Can anyone point me in the direction of those ordinary aluminum flip stops that run in a single "T" track on the top of the rear fence? I see them in a few pictures now and then. I'm fabrication a...
Right - I will pay up to half for a previously owned tool even if it's still looking new. If it's higher than that I'll skip it because at new, or close to new (like at Tool King refurbished stuff),...
I lusted after one of these puppies for some years but didn't feel the need. Then I came across one like new in a garage sale and brought it home. It's the high priced item 12" laser miter saw. That...
Not to try one-upsmanship, Jim, but I have four daughters and nine grand daughters. I sort of think I had a hand in starting a dynasty of some kind. Little girls are a precious gift. Congratulations
:p stealth gloat - good one
wellll, part of the motivation is LOML just brought home a new Saturn today and that shares the garage with my shop/tools. So, I sort of had to make it feel at home when it pulled into her side. :o
This weekend I'm unplugging all my tools except the vaccume and holding a GI party in my WW shop. Everything gets cleaned, adjusted & lube'd as needed and a few rusty spots I discovered cleaned up. I...
....and to further confuse the inquiring mind, here is about the best explanation of the numbers on chisels I've ever read. From an auction site:
The sweep* and the width are stamped on the...
Here are two views of one I made today. The varnish is drying so I dont have the track installed yet but you can see how it goes in. The horizonal blocks are for the screws that hold the track in...
I'm dropping my router into the right table extension of my Delta table saw soon. I want to install a couple of 3/4" tracks to hold down the fences. For those who have done this how did you put in...
David, FYI, the sweep (curve) of carving gouges are based on the golden rectangle in which a perfect spiral is created. Each gouge is a numbered segment of that spiral. With a littel research on the...
http://img.photobucket.com/albums/v305/JerryCrawford/testrouterfence2.jpg
Correct on the collector. 4" to my vac.
Thank you
http://img.photobucket.com/albums/v305/JerryCrawford/testrouterfence1a.jpg
This is a mockup/model of a router fence I put together yesterday. I'm going to make several design changes in the final...