your top three eaxtras are things i'm looking at to and Kinda the way i feel.
kirk
Type: Posts; User: Kirk Duff; Keyword(s):
your top three eaxtras are things i'm looking at to and Kinda the way i feel.
kirk
I build cabinets now for a liveing just took it from a pass time to full time. I use melamine and get tired of chips and replacing blades every 10 sheets to stop it. I'm looking to up grade from a...
Hello all looking for input
I'm back on the table saw quest with scoring. My question is what is the difference between belt drive from the main motor scoreing and an independent motor?
will I...
I did end up renting the KCD software love it simple to use I will continue to rent it. so far i have found no bugs and the customer service is first class
When I started I thought I could use my shop vac for dust and chip collection I found it was to small for my bench top planner. I replaced it with a 2hp dust collector. I like that much better...
Hello all looking for input
I'm a one man cabinet shop I use computer software to design and generate cut lists. The program i'm useing does not work all the time will miss parts and make parts...
Hello all looking for input
I'm a one man cabinet shop I use computer software to design and generate cut lists. The program i'm useing does not work all the time will miss parts and make parts...
Maple 4/4 5.39
Oak 4/4 5.99
oak 6/4 8.99
oak 8/4 12.99
Cherry 4/4 9.00
All the above is s2s and what ever grade falls off the truck.
I just ordered that same head from Grizzly it did not come with bearings on it. The change over is simple remove old head and replace it with the new one. Very few tools needed I was less than an...
My r4330 used to do this to me from time to time all i ever did was cleaned the feed rollers off with alcohol. it would work great after that. The feed rollers would have fine dust on them that...
I have the antena mounted on the south wall and it works great it is one of those boom box dock station radios. Havew used it for 2 years and it works great. I would like to get from the sat to the...
Does any one know of a company That sells Earmuff type hearing protection With a decent Radio in them? I would be willing to spend money on a good set but would like to know if they work before...
I built my router table into my table saw for 2 reasons. it was part of the foot print of the saw with storage under it and I can use the table of the saw for support on larger parts.
I did...
I have owned one for over a month now. I love the power, size and weight of the unit. the noise level is next to none. I ran it for over 6 hrs one day and could still feel my hands. it has lots...
Mike you have hit the Nail on the head for me. I'm makeing the progression as you did and most of the people here have but with the Slider I'm trying to skip a step which is causeing me to over...
Rod I would be interested in hereing about your Saw. What size slider did you end up with? I'm scotish and getting my head around the price is always the challenge. I'm open to any good input. I...
I'm all over the spectrum makeing the decision on purchaseing my new table saw. from Cabinet saw, to slideing table to slideing table with scoreing. I have a couple of question that I would like...
Thanks for all the good coments.
I agree with Rod on the slider saw with the scoreing blade. i was Just looking to off set the cost for a couple of years with the cabinet saw
I have a...
55 inch pounds is what is suggested by Byrd. I think the important part is to use a good quality calibrated tourque wrench not the $1.99 one in the barin bin
Looking for input.
I currenty own a contractor saw and looking at replaceing it with something in the 3hp cabinet saw. I do a fair bit of cutting melamine and would love to cut both sides of the...
I two installed a byrd head in a dw735. the cut was like yours not real good light sanding fixed it. I had talked to people that said over tourqueing the knives causes deflection an poor cut...
This whole thing started for me when i saw a Grizzly 15" Spiral head Run Figured maple at the fast speed and it came out smooth as glass. I have a 700 bdft of maple sitting in front of the planer...
Kinda what i was thinking. Just had to know if it had been done yet
Hello all
I'm looking for input on putting a Byrd cutter head in my 13" ridgid Planer. I would love to upgrade to 15" planer But haveing a hard time Getting my head around the price. the shop is...