Search:

It seams the old saying is true, there is nothing that a torch can’t fix. 5 minutes of butane and it popped right off😉

John thx for the ptopain idea. Took about 5 minutes of heating but it did come off👍👍👍

I turn lots of walnut and when it’s fresh I get spit at by the wood there is so much water in it. All that water creates a problem because of weight if the blank isn’t balanced. I use a face plate...

I haven’t tried WD40 yet. I will give it a goog soaking before service tomorrow and try the hammer again afterwards

I think I did just what you suggested I used the spindle lock on the front of the control panel and put a piece of 1/2” steel stock in the chuck to be used as a lever and pounded on it with a dead...

Yes none found

That is what I checked for the reverse set screw

I just picked up an older 3520b from a friend and it has been I a storage garage for over a year with a One Way Talon chuck on. I can not get the chuck off🤷🏻*♂️🤷🏻*♂️ I am locking the spindle and...

I just got a Grizzly GO462. I knew it had some issues but the three piece banjo has to go. I called Grizzly today to see it they had something and they said no. Wondering what my options might be to...

I am in awe

351521351523351524351526351528351533351537A few of my turnings

beautiful work love the rose

What type of wood is it? very nice piece!

I have had a wood shop for years and last Christmas bought myself the small 10X18 Harbor freight lathe for about $150 after 20% discount. Thought I was getting in cheep Its been a year and about...