Hi,
Yes, there was a discussion and pictures to allow for tilting the table saw. I didn't record the location of the thread, but I saved the pictures. Here they are:
112374
112375
112376...
Type: Posts; User: Philip Giangarra; Keyword(s):
Hi,
Yes, there was a discussion and pictures to allow for tilting the table saw. I didn't record the location of the thread, but I saved the pictures. Here they are:
112374
112375
112376...
This summer I successfully cut 9 of the wavey plexiglass panels (the kind you use for roofs) using a plywood blade flipped backwards. It worked great, and I had a very smooth edge.
Doug,
I just studded and insulated my new shop, and then covered it all with OSB. I really like the look of the OSB, and I can screw light weight hangers right to the walls. Of course, heavy...
Jason,
I measured the hole at 1/2 inch in diameter. I took a better look at the machine, and the spring mechanism is still mounted underneath the bed, so it looks like I only need the vertical...
Hi,
I just acquired a very OLD Delta Rockwell 6 inch jointer (free). It is approximately 50 years old. I fixed the motor (bad contact in the centrifugal switch ... thanks Creekers for the motor...
Since I don't have drawers in my shop, I store all my hand tools in their original plastic cases on shelves (usually vertically, since most of the tools are 3-5 inches thick). I actually look for...
Hi,
My hands get really stiff when it is cold, but I can't pick up anything small when I am wearing gloves, so I solved this problem by cutting off all the fingers of an old pair of gloves. This...
Yes, the code states a minimum wire size, not a maximum one. Using a larger size wire reduces resistance in the branch, and thus delivering more current to your motor (or other load). It also lets...
Hi,
I always clean the teeth constantly (every 10 sec. or so) when I am using a hole saw. You get a much better cut, it is quicker, and you don't get any smoke. Since the "blade" is buried in a...
You mentioned the Grizzly 513X2 bandsaw. I looked at the descriptions of this and other Grizzly bandsaws that all started with 513, and I don't understand the differences. Can anyone help me?
...
Scott,
I bought and installed a 5 hp ClearVue cyclone a couple of months ago, and am extremely pleased with it. It really does live up to its reputation. I am currently running it through 25...