Search:

Thanks - that too is an interesting suggestion.

Well, to close the loop.... after lots of thought, and lots of ideas from many different sources including all the SMC suggestions, I have come to...

Lee/Jamie/Doug/Dave/Rob/Jamie - you guys are great! Loved the input and suggestions.

I can't use frame and panel, as it doesn't fit the style, although that would probably be a first choice. ...

Thanks Lee. That is a possibility. However, I was trying to avoid seeing the fasteners (or plugs for dowels), so I was going to be fastening through the tails in the ship laps (which will be...

Thanks for the replies.

I am planning on commercial hardware and motor. You are right. It will weigh a lot. The door manufacturer is spec'ing the hardware and motor.

As to resawing to...

I have a 16'*7' 4 panel overhead gargage door on my house which I am replacing. I would like to do a steel insulated door and dress the exterior in burmese teak (4/4 resawed to just under 1/2"...

Thanks - that looks like what I am looking for (although very expensive). I will try to hunt a bit for something a bit more economical, but its good to know that the hardware is available without the...

Does anyone have experience with sourcing hardware for a pull out larder - max width 9", max depth 24", max height 7 feet. I can find lots of wire units at 11", but I don't have that space.

I...

I had the good fortune to pick up a HAmmer a3 31 a few months ago. While I have not used it extensively yet, I am very happy with it. Some of the features that were important to me included:...

Thanks Chris and Rod for the quick replies. I will call Oneida and see what they can put together for me. (I am not sure I can reconfigure for a 6", but 5" is no problem).

Is your...

I will be taking delivery of a Hammer A31 31 jointer/planer in a few weeks (can finally trash my old Craftsman 6").

I have 2 questions for all the experienced people on SC.

The dust...

I have had great response from

Alan Campbell
Woodworkersworld.net
2942 Brookfield Rd
Lancaster, PA 17601
800-266-0699
888-208-7530 fax
alan@woodworkersworld.net...

I installed a DC system (Oneida) which uses both flex and rigid metal ducts. There are lots of adapters available. You can either connect at the blast gates (I use a small metal extender (sleeve)...

Well, the door is done. Muntins and mullions made, 3 over 2 (or is that 2 over 3?). In any event, slotted for 6 glass panel. All the pieces came together easily, although I did learn that leaning...

Just to close the loop....

Made some test muntin and mullions today, for divided light. Using the same bits (Whiteside 6003), the only difference was to switch one cutter from one bit to the...

Ray, that sounds like a good system, provided the friction from the mating pieces is not too high.

Well, I finally got my bits from Whiteside, and got into the shop tonight. First step was to...

Looks like a great project. Thanks for posting the description and the pics on the web. This was very helpful.

I was confused by one item. You said that the bit height didn't change as you...

Many thanks for the replies.

It seems that one way is to make a second fence (Daniel's suggestion) so that the muntins/mullions are pushed between the main fence and the parallel secondary...

I have been lurking for a while on SMC, and have learned much. Thanks to all. I have a basic safety question which perhaps someone might be able to answer.

I am making a divided light door (out...

I installed one on my Delta Unisaw about 3 months ago. It is fabulous. Great updraft (into a Dust Gorilla) and having the ability to swing it out of the way easily means that you tend to also swing...