Mr. Holmes, you might go to a local cabinet shop and ask who they use as I did. The owner told me the service he uses does pick up and delivery for pro shops. He gave me their schedule and told me...
Type: Posts; User: Rollie Kelly; Keyword(s):
Mr. Holmes, you might go to a local cabinet shop and ask who they use as I did. The owner told me the service he uses does pick up and delivery for pro shops. He gave me their schedule and told me...
When I put my floor heating system in, I used Pex-Al-Pex ( thin aluminum tubing lined and covered with Pex). It may be the same stuff Rapid Aire uses. It costs a little more than regular Pex, but, it...
Thanks all.
Anyone using magnetic bars to hold their chisels experiencing issues with swarf bonding to the blades during sharpening?
Thanks,
Rollie
I have the 60 1/2 and the skew block plane, both are excellent planes. I bought the skew block first and the 60 1/2 later, not because I wasn't satisfied with the skew, but, because I had a gift...
John, relative to the standard 18v pack, is the adapter/L-ion combo bigger, about the same, or smaller?
Thanks,
Rollie
Keith, maybe you need to be fettled a little bit.
You might email Ron Bontz and ask him what he uses.
Could you be thinking of "Binks"?
The first thing I would do is determine the maximum weight pick I would need to make from that beam. The engineer will probably ask. Then I would get the back story from the previous owner, assuming...
Jack, I have never found the miter gauge protractors to be nearly accurate enough. What do you use to set the m.g. for close work?
Too, when you have your "radio alarm saw" tuned to nuts, what kind...
All good advice.
When I sat my jointer, which has been broken in two twice and put back together by a blind repairman, I had to put Hilti anchors in the floor as jacking and pull points....
Warren, all good advice. In the past, when trying to get multiple tables co-planar, I have found construc
Not necessarily the same manufacturer just the same seller.
If typical pole barn, have you considered putting LED tape lights on the bottom of the truss chords?
Add me to the want list.
The thing people don't understand is that code is the least acceptable work.
Why don't you use the melamine coated stuff they use in showers. It is water proof, light colored, and hard board based. Granted it is slick however, a quick wipe with 100 grit should suppress that...
Jeff, first use as many windows as practical especially, on the north wall (finishing). If you are young, plan on getting old and make provision for additional lighting.
Put up as many fixtures...
Howard, where ever you get your Bluetooth electronics, the speakers will be the determining factor in how good the system sounds. Parts Express, Meniscus Audio, and Madisound all offer speaker kits....
Brian, Bill has hit the nail on the head (re: reflections). While his solutions are are viable for a small interior volume of a car they aren't economically practical for a shop, assuming your shop...
According to "Code", if there are any devices ( boards, control circuits, etc) a 0 voltage conductor (neutral) must be used. Ground wires may no longer be used as current carrying conductors, except...
Gloss white paint is your friend.
Seems as though I saw Hepa rated furnace filters at the BORG.
James, just because the contacts don't have a DC rating doesn't mean they aren't serviceable. You aren't starting the motor directly from the switch, you are energizing a small high resistance coil....