I just finished jointing the walnut slabs and it worked great.
I made extension tables which increased the bed length to
15 feet, and the fence height to 24 inches. The extensions
were the...
Type: Posts; User: Dick Parman; Keyword(s):
I just finished jointing the walnut slabs and it worked great.
I made extension tables which increased the bed length to
15 feet, and the fence height to 24 inches. The extensions
were the...
I made extension tables for an 83 inch grizzly bed, which increased the
total length to about 15 feet. They worked great. Go to my review on this
site for pictures. (Grizzly 609x review and bed...
Just wanted to let you know that I finished jointing the walnut
slabs today. They ended up being about 20 inches wide by
9 1/2 feet long and 10/4 thick. The process went quite
well with great...
I am from Nebraska, and run on to a small sawmill south of Kremling which sells the
milled wood fairly cheap. I bought some of the edge pieces (bark on one side) which
make great rustic picture...
Sorry, the laptop posted without my permission. My main
question was what handle length I should settle on for Thompson's
5/8 bowl gouge. I am going to put his 16 inch handle in the 1/2 inch...
I am about to update my turning tools and need a little help.
I have decided to purchase the Lacer 5/8 and 1 3/8 skew, and
247676247677247678247679247680I recieved a new 609X Jointer a couple of weeks ago, and thought I might make a few comments.
The machine arrived in good condition, and then the work began. As...
Four inch grinder with a cut off blade is the best way to go. RotoZip also makes a cut off blade.
Thanks for your input.. The slabs will be flat planed using a homemade contraption where I use a router with a bowl bit. Kind of like screeting concrete. The process works quite well. I am edge...
I have just purchased a Grizzly 609X jointer, and would like to edge joint 8/4 slabs which are 25 inches wide and 8 to 9 feet long. This jointer has a 83 inch bed. Will that be adequate, or do I...