Search:

I've got a left-tilt saw with 32" rails and I've mounted my Incra 1000SE miter gauge on the right side.

I like it because I have more support under the miter gauge extension arm when it's fully...

Thanks everyone for the responses and ideas. Hopefully I'll make it through the summer a little cooler then years past.

Jon

My workshop is located in a 2 car detached garage. The garage is old and uninsulated. I live in Texas so most of the year I can open the 2 garage doors when I am working in there, but in the summer...

Hi,

I've got the question out to my electrical inspector but while I am waiting for his response I was wondering what other's have needed to do for the rough inspection when installing a subpanel....

Thanks for the reply.

Duh, I guess that makes sense that the airflow is limited by the surface area of the intake. So I guess 6" lines make sense only when you have a 6" port at the tool or a wye...

Hi,

I've got a Delta 50-760 1.5HP DC that I wheel between tools. It's got a 5" main port with a 4" wye connector and comes with 6' of 4" flex tube that I've been using to connect to the tool...

Thanks Steven and Jim for the replies.

After some more poking around online I found a product which essentially sounds like what Steven is suggesting. It's called a bottom seal retainer. It's a...

Hi,

The slab in my detached 2 car garage (soon to be woodworking shop :) was really badly heaved and cracked (no rebar and only 2in thick in spots). A few weeks ago the slab was cut about 6...