Search:

Just depends on what you are doing with the sander .. fine finishing or stock removal. The bigger the oribt the faster it is for stock removal and the smaller orbit is for Fine finishing.
Festool...

i just recently purchased the Milwaukee Fuel 12 volt barrel grip and Its a Great Jig Saw. Cuts super smooth and has Auto mode that ramps up speed if it needs more power. I would definitely buy...

The insert screws have to be torqued to the correct number with a torque wrench that is in inch pounds or nm. On my Hammer silent power head with inserts its like 44 inch pounds for the setting.

Alan .. I'm going to be experimenting with Shaper Origin to make inserts up for my Hammer 4400 Bandsaw. It should be an easy process I'm thinking

Luis I may have one and will try and find it later today.

I use Butchers Bowling Alley wax and Felder Silber-Gleit on Jointer and Planer tables, Table saw, Band saw. The Silber-Gleit is super slick after a few applications. Never use an automotive wax that...

There are 2 types of Sandpaper Open Coat and Closed Coat. The difference is in the distance between the Grit particles on the paper. Open Coat will shed the sanded dust material easier because of...

I needed Rubberwood for a project at work and ended up getting a rubberwood countertop from Lowes and using that for the wood.

You can also consider a combination machine like a Hammer A3-31 used or new

Glad it worked out for you Earl

Derek Send me a PM with your email address and I will send you a copy of the manual.

Jeff Is it possible to buy the complete fence assembly for the Domino with the new style paddles and slide it on your DF500 that has the pins ?
Edit ... I just looked on Festool's Ekat system and...

How would either Phenolic or HDPE with these 5/16" X 18 Threaded inserts for the threads ?
...

I'm keeping an eye on this as I need a few for my K3 also.

This is a 80mm Felder Scoring Blade that has 20 teeth, pretty sure used on Felder Hammer K3 Sliding Table saws

Congratulations on your New K3.
I just purchased the Felder Dado for my K3 about a month ago .. Yep it Costs a lot but so did the saw. I've made several finger joint boxes just over the past 2...

That looks like an interesting product.

Also make sure the Red Emergency Stop button on the side under the slider is in the out position. If that is in it won't start

I have attached pictures from the install sheet for the Hammer extension coupling. The washers are spherical ( 2 of them make 1 set), one fits into the other to take up any misalignment when...

Is there a way to measure the distance between the top of the white plastic on the bottom to the sprocket on the top and make all the measurements the same. Cut a piece of wood then with a screw at...

Yep its defiantly a Rockler Mast R Slide model 7500 made by Jessem. I also had one a few years ago

Second piece of Advice do all the exercises that they tell you to do every day religiously ! My wife had a full replacement in 2012 and you would never know by watching her walk that anything was...

It is supposed to be really good. There are 2 models .. 1 has a 5mm orbit and the 2nd has a 3mm orbit.

My Hammer K3 does have the scoring option and uses the 2 thin blades and the required number of shims to match up with the main blade. It does also have side to side adjustment to center it up with...

You'll have to see what orbit each of those sanders has. A small Orbit say 3mm , 3/32 will be less aggressive than a 5mm Orbit. The small 3mm are more for Finish sanding.