Does anyone know where I can get small vibrator units and heating elements for a recliner chair I am attempting to build? Any help would be appreciated.
Type: Posts; User: Rags Alan Ragland; Keyword(s):
Does anyone know where I can get small vibrator units and heating elements for a recliner chair I am attempting to build? Any help would be appreciated.
Just sold my Epilog and Sand Blaster and am going Sailing. But just wanted to thank all of you Creekers for all the help you have given me and to say that I really admire all of you for sharing your...
Once again thanks to all of you for your help. It's so comforting to know that you are all so willing to help.
I think my solution is to pain a second coat it must be within one hour of the...
Thanks guys I knew I could count on help here. You-all always come through.
Frank--The Krylon is from the same batch and even the same color (second Coat).
David--I'll try the clear you suggested...
I need expert advice--I am painting one side of acrylic sheet and then engraving the paint off on that side. Has worked perfictly and really looks good. Now when I attempt to paint the painted side...
Greg
It depends on the effect you are seeking. black usually means blast. The depth of your "blast" = size of line. Small text = shallow "blast" If you laser the grapes as you have them you can...
Hi Sa.
My Epilog has done the same thing on more than one occasion. I replaced the mother board twice and no joy. Then I found out that the emergency switch was sticking and not releasing. Fixed...
Dave
Sorry I thought you wanted what we paid for the bats. I'd rather not post what we charged for them but to simply say that I never break down the laser charges. I simply charge a unit price....
Bats on sale for $15.95 Gloves $23.95
Purchased from "A-Team Sports
Cumming Georgia
(770) 889 9980
I do not have any affiliation with this...
Thanks Daniel
My client wants their convention logo, name, and presenter on there and I just don't know if it will all fit.
The bats were all wood bats. From 18" ---36"
Dr. Rags
Daniel
Your timing could not be better. I am in the midst of the same thing. I have an order for 12 gloves to be engreved but cannot decide where to put the logo and names.
I just did 60 bats...
Frank
Thanks that is exactly what I am doing except at 100sp 30-40 I get a nice white blob. On marble I get a good rendering at 100sp and 8-12p. But I cannot get the defination I see everyone...
I have photograv but am not as much of a fan as everyone here seems to be. Have run two of them through and am not impressed at all.
I tried to follow Frank's posting of Rodneys system but got...
Hello creekers,
Does anyone know of a site that will "Prepare photos for rastering on marble. I see some of the work you guys/gals do on here and I cannot get close to that level. I have 12 photos...
Ross
My prayers and hopes are with you. Many of us have gone through what you are going through, and most of us have made it just fine. This is just another chapter in your life and now it is...
Janet
It is done with a chroma crystal system. I have it and do a lot of work with it. It is quite simple and is a real crowd pleaser. The good news is that any photograph can be used and does...
Skip
Thanks for your stand. Your timing could not have been better.
Only one question---for us Colonials who do not use metric just how thick is 0.111 in inches? I just made ten of them using...
I have been doing glass for two years now and have not used soap, paper, or anything and get good results. What am I missing with this soap and paper advice?
I do glasses, plates, bottles, vases,...
Gene
Try Crystal to crystal glue item #111G2.
It is cured by UV light and holds very strong
www.glt.com
Dr. Rags
Jmes
I make light bases for most of my glass blasting plaques and I get the lights from: Vibelights. www.vibelights.com They have most everything
we would use for backlighting, edge lighting,...
I believe this is a logo for a surfboard company that also manufacture a line of surfing clothes out of Hawaii. I could be wrong but I seem to remember it as a logo.
Dr. Rags
Count me in Mike and thanks.
Please count me in as well.
Yes Debbie you can laser cut MDF, and yes it is made with formaldehyde and yes it has been shown to contribute to cancer. However, I use it all the time and intend to continue. I am not one to...
Tim, Frank
Thanks guys I did a little of both and now have my jig. I'd post a picture of it but I'm probably the only person in America without a good digital camera.
Again thanks y-all are the...