Tim, The First Thing I Do With A Drill Press Is Make Sure The Table Is Exactly Square With The Spindel...take Out The Pin That Locates The Table.then Put A Dial Indecater In The Drill Chuck And...
Type: Posts; User: EDDIE GLAZE; Keyword(s):
Tim, The First Thing I Do With A Drill Press Is Make Sure The Table Is Exactly Square With The Spindel...take Out The Pin That Locates The Table.then Put A Dial Indecater In The Drill Chuck And...
Richard Raffan Has A Book Out Called Turning Boxes With Richard Raffan
I Have Washed My Buffing Weels ,worked Great. They Are Not Beals. There Sanoma Buffing Wheel`s. Happy Buffing.
I Agree With Reed The Only Diferenc Is I Use A Burnishing Tool.i Grinde The Scraper, Hone The Top Of The Scraper Then Burnish It. There Was A Previous Thread On Grinding The Spindel Master, It Was...
I Have A Delta 8" High Speed Grinder, Also Equiped With Oneway Weel Balansers. 5 Years Old No Problems So Far. I Highly Recomend The Weel Balancers, They Eliminate Vibration, When Weel Is Properly...
Forget The Skew Jig, Get A Platform Rest Set It At The Required Angle For Sharpening Your Skew, Designate It Strikly For Skews. I Have The Skew Jig It Now Sits In A Drawer, Collecting Dust. Just A...
Nise Save, Mine End Up In The Wood Box For Burning
yes they are
Steven, I Use Brake Cabels, Cabels For Changing Gears Clutch Cables From Bicycles And Motorcycles. They Are Different Diameters. I Attach A Handel To Each End. Happy Turning.
Joel, Not All Tool Steel`s Are The Same...take A Look At Griggs Steel Co. Charts. The Hardness, Wear Resistance, Tuffnes Of The Steel`s Are All Different. M2 Max Hardeness,64 Rc. Others Up To 68 Rc....
look up tool steels on the internet
Enything By Richard Raffin, Books, Videos, Dvd`s
Thanks Steve, Like Your Steady Rest. Happy Turning
Nice Tutorial Thanks Steave & Michael.
Richard, Look Up Diamond Grinding Weels On The Internet, They Have All The Info You Want. I Am A Ritired Tool And Die Maker, Dicast And Injection Mold Maker. We Made Most Of Are Own Cutters Out Of...
I Agree With Reed. We Only Used The Wheels For Grinding Carbide Cutters.hss Steel Will Plug Up The Wheel.
Karin. I Don`t Now Anything About Your Drill Jig, I Asume You Are Useing A Drill Press. If So Make Sure Your Drill Press Table Is Square To The Spindel Of The Drill Press. The Tables On Drill Presses...
Rorert Inline Skate Weel Bearings 1/4" Id. Lacal Bearing Supplier Should Have Them. Make Sure Thay Are Totaly Seald. (contact Seals)
The One I Had Was A Sorby And Had Bronze Oilits.and It Still Wore Out The Shaft. This Looks Looks Like A Good One. Happy Sanding & Happy New Year.
I Built One Out Of A Metal Cabnet 30"w.x 20"d.x 36"h. I Use 3 Light Bulbs And A Varieable Speed Fan. The Watage Of The Light Bulbs Depends On How Hot You Want It. I Have 2- 40 Watt 1-100 Watt. With...
I Agree, It`s Superior. I Also Hand Sand. Explation, Hand Sand With 120 Grit, Power Sand With 150 Grit, Hand Sand 180 Grit, Etc. Doing It This Way When All The Hand Sanding Lines Are Gone From Power...
Make A Longsworth Chuck Out Of Aluminum Plate, It Will Save Changing Buttons. Just A Suggestion. Thats My Next Project. Happy New Year & Happy Turning
I Had One Wore The Shaft Out On The Pad. Trashed It, Bought A Porter Cable Angle Air Grinder ,1/4 And 3/16 Collet Use It With Air Or Without Air Had It For 3 Years Still Going Strong. I Use It Mostly...
I Agree With Andy. I Have Turned 18" Bowlws This Way.
Nice Box. No Such Thing As Overkill. I Store My Chucks In A Drawer On Round Spigots .i Have 5 Chucks So I Don`t Have To Remove The Jaws Happy Turning.