Search:

I have no idea on the age but I really like how the graduations are etched into the metal. Nice to give it more life.

One slick move if you do put a stain or color on it is to put liming wax on top.
http://www.briwax-trg.com/products/briwax/limingwaxhints/limingwaxhints.html

I'll chime in- laminating will give you very good service and not that hard to do, there many good videos on Youtube to get you comfortable with the process (do buy a J-roller). I would definitely go...

I am a new BS user but I recently purchased a set of urethane tires and I must say that they are working out great compared to the rubber tires I replaced. The first thing I noticed is that the dust...

I tried Titebond 3 and it worked great.

I would question the spray equipment. Silica is used to produce a satin sheen generally and I am wondering if your spray gun was leaving heavy areas on the edges. Also make sure and stir it well to...

Are you sure that your straight edge is accurate?

Paul S. was using a shave.

http://www.insl-x.com/product-detail/inslx-products/cabinet-coat-enamel

I sure hope you had help with the clean-up and by this I mean a glass of milk.

Epoxy's are great sealers. I did not click link because I did not want this to show up in my search list but most are similar. Two things-epoxies will mostly give a thick build so if that is an issue...

So I was watching a video by Paul Sellers on the tube and he was demonstrating spoon carving. As he was doing his thing he mentioned 2 or 3 times how "if you can use a peel a potato you can certainly...

So I think a better fix is to add a piece of wood to one side. To me this makes a framing square more useful in a wood shop. It is adjustable and it hooks on the edge.
295935

You should use an exterior finish. Oil would be a better choice, but you could go with a WB type wood preservative. Most canned stains are for interior use only.

Artists oils can also be used so that you will not need to buy another can of stain.

So I replaced the quick connect coupler and it fixed the problem of not being able to get it off w/o driving a nail first or shutting off the flow of air. Thanks all.

BTW I never did find such a...

Removing my tools under 90 psi seems wrong really and a lot of times it does not come off. Maybe it is the coupler that is the problem but at the same time it seems a bit dangerous and also it is...

I do not know what it is called or if it even exists. I need to be able to relieve air on my nail gun for quick switch. My current method is I have a ball valve right before gun and so I shut it off...

http://www.sawmillcreek.org/showthread.php?197588-Reuse-for-jointer-blade&p=2043204&highlight=#post2043204

Certain plastic can be welded with a soldering iron. I did it for the first time and it worked pretty good. There is a good site for plastic info....

Thanks for all the info everyone. I called the guy I purchased the saw from and he found the missing lower guide and so I went and picked it up. It seems to help a bit but I do feel like I need to...

So I just picked up a used 14" Jet and it does not have a lower blade guide and I cannot see where one would even mount so I am wondering if maybe this particular saw does not have one? Also the...

Nicely done. If you want to make sure and not have problems with the dye moving the best thing is to seal it by spraying. Shellac. Also don't forget to stamp your name on the bottom some where-that...

No kidding I did not know you could plane metal.

sfbay.craigslist.org/sby/tls/3991417718.html



269162269163