Thanks again guys. JimE
Type: Posts; User: Jim Eller; Keyword(s):
Thanks again guys. JimE
Thanks Shawn and John.
Shawn: A glue gun without a trigger. 70's model and still goin'. Now that's a classic. :) You didn't say what brand it was. JimE
Thanks folks. I have had the hobby type guns but they don't seem to get very hot and retain the heat. They seem to work good for a dab here and a dab there but for a larger area they don't produce...
............... hot glue gun?
One to use for tacking, temporary removable bonds and the like. One that heats up quickly and can produce a fairly good stream of hot glue.
Thanks,
JimE
David,
I would agree. A little pricey but you get what you pay for(or close). Kind of like my Festool tools. You either love 'um or ya hate 'um.
The TS fence is something I wish I would have...
Andy,
I think I will bolt the extension to the wing now while everything is aligned and flush. JimE
Andy,
Once again, THANKS!
I will find the manual online and give it a look.
Just check the PM66 and how the wooden extension is attached. It currently is attached to the PM rails with six...
J. Greg Jones,
Really helpful info and visual.
If you had to do it again, how many L-brackets would one really need? I believe it come with 6. Would four on the cast iron table/wings and four...
Thanks for the info and the picture. That looks like my PM saw is what I am talking about doing. I can live with the once every 7 years things. At 73 I won't be needing it too much. :)
I see...
Thanks to all. Your time and effort is appreciated.
After a long conversation with Mark in tech service at Incra I placed my order for the 32" model. My main reasons for choosing the 32" model...
Hoang N Nguyen
Thanks for the information. It really helps.
Questions: You say you have a 36" model. I only see 32" and a 52" models. Is it an older or different version that I am looking...
Thank you. I currently have my jointer to the right of my table saw and the slide will go over the top if it but will limit access to the jointer. JimE
Mike - I sent you a PM. JimE
Earl - Thanks, see below
Andy, see below
Andy, My PM66 has 19" of cast iron on each side of the blade slot. Thanks again for input and your time. JimE
Thanks Andy. That helps.
I just read that the 32" can cut up to 52" if you move the rails to the right? I do not do anything to the left of the blade. Know anything about this?
I also have...
........ forget it.
I've always been intrigued by the Incra fence, have few nuggets in the tool budget and I and thought I would give it a try. This would be going on a 2005 PM66 with a 52"...
Thanks to all. That's about the size I want Gene. JimE
Thanks John. From what I can see, they only supply standard size springs. JimE
Any idea where to buy springs to build some large clothespins. Looking for something for about a 1" wide clothespin. Thanks. JimE
Thanks Terry. Here's what I have going so far.
Thanks Terry. I like that magnet idea. JimE
Looks like the stuff I picked up yesterday. Haven't run it to the lathe yet but I think it will work. Of course I will have one open end and I think it will need some kind of support.
Kent, Looks like it has some possibilities. I also picked up a piece of 6" aluminum flex duct at HD as Bill suggested. This stuff is pretty rigid and I think will work also. Thanks.