Search:

Hi Riki,
I too live in wellington ( lower Hutt ) with a 40w Laserpro explorer
also Emma Austin another laser owner here lives in Wellington ( petone )


Rowan Hay

Hi Emma,
all sorts of different things. Its been a huge learning curve as to what works, what doesn't. also getting, making and trying
different designs can chew up a lot of time. But its all good...

Hi Emma,
I also live in New Zealand and have a laser. Visited your website.... very nice. Looking at the contact page I see your phone
number starts with 586, putting you in the Hutt Valley Area....

Many thanks for your help Rodney
Contacted the New Zealand Agent with no joy, sent me information that was of no use.
Can't find any jumpers when looking at the main Board and nothing in the Hidden...

I have a Laserpro Explorer 40 watts which has developed a problem that I can't find the answer too. When cutting Acrylic it is leaving a tracking mark aprox 2mm wide both left and right of the cut....

Hi James, I don't know???? I opened it fine and saved it and opened it.
Sorry I don't know why?

Nice work James. There are lots of Fishermen ( & fisherwoman ) who will enjoy it.
Heres a twist on your idea

Steve, If you can't pass a nice comment then you might want too think about making no comment!

Can you engrave Toughened / Tempered Glass with any success. Any help would be gratefully received. Many thanks

As much as you should be cautious, you shouldn't stop making interesting items. If we worried about every possible thing that could go wrong, we would never leave our rooms. The 12v wall plug that...

Dan,
She got married at the base of a Mountain ( old volcano ) which is an iconic feature of the area. So what we did was cut the shape and folded up.

Here's some ideas that may help that I recently did for my daughters Wedding

The patent basically covers the way in which glass, perpex etc is held using a clamp method. The u shape piece inside slides across and clamps the material being used. If you want to change the...

Hi Colin,
yes there is an extrusion, that I have been putting LED ribbon in the bottom of. The extrusion takes thickness sizes 6mm - 10mm and comes in any length up to 5m long. I have just finished...