Glad you're enjoying your machine.
Type: Posts; User: Ernie Martinez; Keyword(s):
Glad you're enjoying your machine.
Largest collet for an ER11 is 1/4"
Hello, I've been away for a while, but finally got the machine up and running again.
I'm trying to cut a 45 degree mitre on 3/4" board. Unfortunately I can't find anything bigger than my 1.25"...
I've been off the list for a while because of a move I haven't used my machine much. I'm about to start using it again for a project of mine and came back to the list to solicit some help. I posted a...
I ended up buying the graco true coat sprayer. Works great, throws a lot of paint, but I can paint a sign in one pass. Clean up is easy since you use a plastic liner in the paint cup. Just fill and...
No, I have custom shape requirements.
Not sure what you mean. I have the capability in house to cut metal, I'm just trying to find the quickest and easiest way. I have several choices.
I can use Rowmark Plastic 1/16"
I can use...
I was thinking about that. I'm going to have to research what kind of bit to use.
I'm talking about the .005 thickness. I cut it all the time with scissors, but thats not effective for me.
I'm looking at using Durablack for a project, but it needs to be cut to a specific shape. Is it possible to vector cut with a 50W laser? If not, how do you cut it to specific shapes, other than using...
Thanks, this is the kind of info I was looking for. Can you tell me the hp of your spindle,and what kind of motors you are using , stepper or servo, size etc.
Thanks again
I use freckle face http://www.freckleface.com/
I'd like to here from folks with machines similar to mine, benchtop, 2 HP spindle type machines. I'd like to know what your maximum feed rates would be to create a pocket tool path with 2" high...
Its a forth order optical diffraction artifact.........Just kidding, I have no idea what causes it :), support said it's normal and I just accepted it.
I saw the same thing when I aligned mine. Epilog support said it was normal, and not to worry.
I've never used RAMP which why I was asking for some starting parameters.
Any suggestions on Smooth, ZigZag, Spiral, Angle, Distance? I'm cutting out circles, core of circle is waste.
I'm about to make a panel for an airplane, and this is my first aluminum job on a Router. Can I plunge cut into .060 aluminum sheet, with a .250 end mill to start a circle cutout (3 1/8" circle) ?
Well I'm not quite sure adding one is a "GOOD" idea, it's just an idea. I don't like the water cooling. The machines weak points are, the spindle, controller, and the electronics. The frame is very...
I've looked into one shot and spraylat, and the problem I keeping coming back to is availability and color selection. I haven't been able to find a dealer near Fl, and my customer is very specific on...
If you want a taste of Chinese Machines, read a Thread that I started "Initial Laguna HHC review". I have been documenting my experience with this machine since there was no available information on...
Another update on my Laguna IQ HHC. Well today I decided to get back to work after a long Holiday break. First thing was there was no water flowing through my spindle, turned out something clogged...
No check valves or anything. I used a compressor and blew the out of the spindle and was able to get water flowing again, but it's still very restrictive. The pump puts out a respectable head...
I have a Laguna IQ (Chinese), which wouldn't be sufficient for your job, but based on my experience so far, go with a US made machine, if you're dealing with big hunks of wood, you'll want a real...
Has anyone dealt with a Chinese water cooled spindle that wont pass water. My new less than 3 month old Laguna IQ is raising it's ugly head again. Came in today, after being down since the holidays....