Search:

Please count me in.

Please count me in.

Since you will be plunging - get the spiral up cut - which moves the chips up and out the hole.

I would like to opt in

Please include me in this drawing.

My router table is 36 x 24 inches made from 2 pieces 3/4 MDF laminated together. This is attached to a 3/4 ply box 30 x 20. I boxed in the area for the motor and added a vac port out the back of the...

I just subscribed to ShopNotes and they sent this awsome guide for setting up a small shop.

Shop vac junkies should investigate a mini-cyclone. I have the dust deputy from Oneida Air and it works great.

99% of dust, chips, etc go into the cyclone, add a Hepa filter to the vac and...

Anyone have experience with Sunhill Machinery? I am looking for a table top 6" jointer. I will use it for DIY home shop projects.

I am a hobbiest and last year subscribed to "Wood". I am looking for other magazines to read.

Whats your favorite?

Ryan,

a great chance to save $ 50
Dino is running a 1 day special on Ebay for the SGS-100 inch guide rail system.

search Ebay for eurekazone.

Look at Eureka Zone a sponser on the creek.

Please include me.

Opt In please!

If you were to round over the PVC with a router you could increase the efficiency of the collector.

These plywood boats are excellent if you use the correct plywood, and epoxy / fiberglass to protect the wood. I have built three ( stitch and glue ). I agree about the size. My 11 foot boat can...

I would like to be included.

I built the FL12 and FL14 from Bateau. I have a 9 hp motor which moves these boats about nicely. I fish lakes and ponds. Both are very stable and I stand while fishing. Mostly I use electric...

I have build two boats from Bateau.

Their method is Stich and glue and there is no lofting required for their boats.

Do not go cheap on you wood, glue, or paint selections. All the worry and...

Very generous. Count me in!