Search:

I read this thread with interest and a chill (near disaster). Has anyone heard of a collection of "AA" or "AAA" in a drawer or duffel bag, "Bringing Heat" .....or is the voltage so low that not...

Same problem on my 3 month old Jet 10-20. Belt tracked strongly to the outboard (left) end. No adjustment would cause it to track towards the inboard. I reversed the belt, ordered another - on Jets...

I've installed hundreds of Blums - 'nuff said. An old fixed base (round) router with a 3/4" straight bit, is my dedicated Blum "hole digger". I fashioned a cup hole locator and routing guide from a...

I'm running a 3/8" x 4 tpi (Lenox or Timberwolf) on a 16" Grizzly about as tight as I can crank it.... for resaw work, in soft or hardwoods.

The other day I ran some 4" high x 30" long maple and...

Like the answers to so many threads; a lot depends on your nature and how carefully and accurately you like to work, and of course the kinds of projects that you will most often be making.

Since...

That would be wonderful; FWW, what an amazing treasure trove!!

Thanks,

Gordon

Suggestion: Clean all your "sliding surfaces" of wax-gunk buildup and spray a very light "dusting" of "SailKote" (aka Team McLube) ...dries in 5 seconds/no polishing needed. I guarantee: the most...

Yes, another PC690 vote here! I have 3 (fixed base) and the PC plunge base (6931). Power, weight, grips at low center of gravity, guidebush standard, price, quality.....seems like 690 has been...

Another factor: The cost of Enthalpy Therapy! I checked the yellow pages (what's that?): $185. per hour, not including the down time while you're at the Doc!

Lots of good variables have...

I've just finished a 2 week session with my D4 & 11/16" cherry, maple, walnut, white oak, and mahogany. Most of my joints do not allow a piece of paper. BUT, early on I had some gaps as you...

Kudos to T.P. ..... a fine organization! Please throw my john henry in the hat.