Home Depot Strap Wrench out of the plumbing department solves the problem with not having wrench flats. Cheap no damage solution.
gary
Type: Posts; User: Gary Click; Keyword(s):
Home Depot Strap Wrench out of the plumbing department solves the problem with not having wrench flats. Cheap no damage solution.
gary
Home Depot Strap Wrench out of the plumbing department solves the problem with not having wrench flats. Cheap no damage solution.
gary
I have used dry ice in the hole with really good results. Also works very well with ground squirrels and moles.
I have a DoAll DBW-15 and it will weld blades from 1/4" to 1". Can't tell what kind this one is but it looks similar. I paid almost nothing for mine at auction.
I use mind quit a bit, I weld...
I paid $52K and change for our ZCorp 450 about 3 ears ago.
My experience has been a little different. Our water pressure can exceed 140psi. I have found that if the pressure creeps up on the house side while using a quality regulator like a Watts, the...
Opt me in please!
I have a DoAll DBW-18 blade welder that I use. This welder will will weld up to 1" wide blades. Like most welders it includes a shear and a grinder. I picked this welder up at a plant closing several...
You reallly don't want to know. We use FerroNickel Alloy in some of our metals. FerroNickel is the aditive that would be added to the pig to adjust the alloy nickel content.
FerroNickel is...
From first hand experience, I think that you only think that you want to know.
Best control I have found for mole, ground squirrels, etc. is dry ice. break up a pound or so and place the chunks in the holes and cover with dirt.
gary
Appoligies for this being slightly off target.
I want to replace my current 12X36 metal lathe with something a little heavier. I am looking favorably at the G0709 14X40. Curious if anyone out...
Lacquer Thinner completely releases and removes Scotch 77. I use it to glue paper patterns on wood.
gary
Count me in please!
Count me in please!
I am in the process of building an operational .22rf Gatling Gun. As you can imagine this gun is made of a lot of polished brass. After polishing I have found that Clear Powder Coating is best for...
Thats actually extremely good. The theorical perfect power conversion (that's power as in watts not current as in amps) for 100A 1ph would be 100A/(Sqrt 3) = 57.735A. Pretty close to 55A.
If I...
You likely better served by a Variable Frequency Drive (VFD). These are used on a one drive per machine basis and can be sized to suit the specific motor. The 3 phase current is electrically cleaner...
Got mine today, moved it into the shop and open air crate. CI Trunnion arrives tomorrow and will assemble then.
I was surprised at the color, Polar White suggests a bright stark white to me like...
I did order the cast iron trunnion also.
Got tracking notification that the Polar Saw will be delivered today. I am at LAX heading home for BHM. It should arrive before I do.
gary
When we built on to our house several years ago, I decided to take in the area under a double garage as a storm room/man cave. The room is below grade, has 12" thick poured cell walls and a 6" poured...
I think that facts are being confused.
The Maximun Current Draw of the motor is 20A. The reccomended circuit size is 30A. Read this as #10 wire, a 30A Panel Breaker and a 30A recepticle.
2HP...
When we first moved to Birmingham I was cleaning out the basement, I saw movement out of the corner of my eye and did a double take because it looked like a scorpion about 1-1/4" to 1-1/2" long. I...
I cut plate and flat bar up to 1-1/4" x 8" using a Skil Saw and abrasive blades made for metal. I keep a cheap saw specifically for this purpose. The blades are available at the box stores and I buy...