Search:

Hi all, I'm making a wedding card (safe?) for my sons wedding, It's this hollow heart with a slot in the top and a locking door on the back.
I made the front and back out of 1/2 inch MDF and the...

My band saw has 2 speeds. I only use the slow speed for cutting metal, everything else is on high speed, I've tried cutting wood on the low speed setting and I ended up breaking the blade, guess it...

Thanks Charlie, Hope tey don't chrge to much to sharpen blades.

This happened to me once. what I did was get a piece of oak 1 inch larger than the gap. Then I put my router on the 1st floor and set the depth for the 1/2 in. rabbit, then did the same for the...

Hello. I have a 6in. jointer and one of the knives has two visable knicks in them. what I was wondering is, can I sharpen these with a file, or do you have to send them to a machine shop, or is it...

Thanks everyone, I did't know you could get casters that would lock the wheel and the swivel action. As for the taper legs, I think I,ll experiment with a wedge and some 2x2 straping, but when it...

Thanks Alan, I was just concerned about the casters having abuot a half in swing in them, even when locked, and some times a half inch is the differance between keeping a finger and loosing one on a...

Hello, This is my first post, and I hope it's alright if I ask some questions to some of the more experianced woodworkers.
First, Is there a way to set the tables on my jointer to cut tapers (like...