Search:

Thanks for the tips. I'll try my 1.5mm needle when it arrives and hopefully it breaks up the material better.

That's a good point, Jim. I guess we're on the same wavelength because I ordered a 1.5mm needle to see how that would atomize the product. The 2.0mm did okay, but the droplets were a bit large, so it...

Hey all,

I've been shooting pigmented EM6500 out of my Earlex 5500 HVLP onto a built-in bookshelf inside my home and am having some issues with mud cracking. Seems like I can't apply a full wet...

Thanks again, Jim.

I did have some doubt shooting EM6500 directly over the grain filler, so I will go on the safe side and prime over top of the filler as well, then shoot my pigmented coats.
...

Thanks for the response, Wayne.

I'd like to go the route you suggest and have looked at the HSF5000, but the reason I was going with BIN was to ensure I don't get any bleed through from the ash. I...

Hello all,

The boss wants our old cabinets painted white and I want to run my plan by the good people of SMC to see if I'm on the right track. I'm all for planning everything up front so there are...

I don't know how particular you want to get, but Kreg sells plugs that will fit into those holes. Glue them in, cut flush and sand down.

I can't answer your question, but I'm curious, so I'll be watching this thread to see what the responses are. I sent a message to the TC email box regarding their EM6500 and the crosslinker as far as...

Thanks, John. Yeah, I've been brushing Advance on my casings and crown molding and I like the paint, but you're right, it does take a minute to fully cure. Also, I tried practice spraying it once and...

Thanks for the info, Jim.

Interesting about the burn-in. I guess the 9000 series would only be a "mechanical" bond instead of the "burn-in" type bond with 6000 series. When you say "if you like...

Thank you all for the insight. This place is great!

I considered getting a different gun, but I'll first try mine and see if it's up to the task. Very good to know that the EM6500 is considerably...

Hey all,

I apologize in advance for another cabinet question:

I have no idea which type of coating to use to get my cabinets white. Rolling and/or brushing is not an option for me because of...