I have ordered direct from GCC America ( X Motors). I would try Jorlink first. Feel the same about Sign warehouse.
Mike
Type: Posts; User: Mike Page; Keyword(s):
I have ordered direct from GCC America ( X Motors). I would try Jorlink first. Feel the same about Sign warehouse.
Mike
Try Jorlink. com . Talked to them three weeks ago and this motor was in stock.
Mike
Hi Randy
The boards we make are finished then screen printed. But you
are engraving so I think you would try to fill, let it dry and sand
the top of the board. Then you finish over the top of...
Pizza delivery driver:rolleyes:
Sorry Angus, I know your pain, I have been down that road.
We have the same problem with ours. Same machine, small font looks doubled size 10 and under. Just the letters for us.
Thanks Michael
Your program is just what I needed to see.
1997 thurmwood C-40 (Its on ebay)
Description:
7 HP Vertical router motor
5 HP Piggyback router spindle
(11) Spindle, 32 MM...
The company I work for is looking at buying a thermwood c-40 (used). If they do its going to be dropped in my lap.
Can someone tell me what software this is going to use and possibly send me a...
We use dry erace markers. It sticks to the engraving and wipes off the smooth tile very easy.
We have one that has been outside for about four months, that we put a clear coat on after we colored...
I would also call GCC and tell them you have a problem and can't seem to get it taken care of thru S/W.
GCC has a office in Walnut CA . I have called them and will not think twice about calling...
I believe you will need permission for each Item.
If you get to use a logo for a product you can use it for that item only.
Could be a door safety switch?
Well its been 30 days that we have been down now. Sign warehouse last told me that GCC would send A new (tested) mother board pcb and motor from China or wherever? On the 21st.
I called GCC...
Hello Alejandro:
All you need to do is disconnect the 2 wires from the motor control board, then you have to remove the 2 3mm allen head bolts and pull the motor. The belt should be tight enough...
Hi Jerry, The error message is X MOTOR MALFUNCTION
Richard, the machine never moves in X or Y, I get the error at power-up .
Well I get the same results with the new motor. So its on to the pcb and the flat cable.
Yes it runs on the bench. I get the errer msg. right at machine start up. The table drops then when the x and y axis are to home I get the message.
Now I get to work this morning and I see the...
Shhh I think she is sleeping.;)
First of all I want to thank you all for the help and say what a great forum this is!
I did clean the shaft encoder. I dont know for sure that it is the pcb...