Search:

Check the Jessem web site. They have a list of compatible router models for their lifts. If yours is not listed (my router was not) a email to them got me a quick response when I was shopping for a...

Josh,
Parts for WEN products don show up at the usual parts suppliers online nor does a full listing show up on the WEN site. The ONLY source I have found is by phone from WEN.

You will get...

Please include mt name in the drawing.

Thanks
John G

I have one of the Powercrasft saws. Srill in use on and off when I’m working up at my camp. That’s where it’s migrated to simply because it does pretty much everything i need to install a T&G ceiling...

Do a search for Aircraft plywood. It's made to a Mil Spec and that should be the best grade out there. Price might curl your hair but if you want no voids I suspect that's where you will find it. ...

Not knowing the physical size of the "nut" in question and assuming that it is a conventional thead this may be be a dumb suggestion but here goes.

Have a Helicoil installed. Being Veritas there...

Bosch sells a 16 ft hose that is really quite flexible. I bought one when I had about 50 12 ft t&g boards that I was prefinishing before I installed them in a kitchen ceiling. It fit my older Bosch...

Looking at the motor tag Oliver sourced the motor to The Louis Allis Co. A little googling and the company still exists but are now located in Warrior, AL They still make specialty motors. While...

Look at the VintageMachinery.org website. Go to the woodworking machine area and the photos section. There are several photos of 144 BD machines with serial numbers and dates of manufacture. There is...

I've a camp outside of Monterey that I've worked several projects over the years. Finding the "odd stuff" that the big box stores don't carry has been a bit of an exercise over the years. I've had...

From the looks of it, with motion in both the chuck end and the pulley end of the shaft I would suspect something with the quill bearings. There are two in there and there is at least one sort of...

Sounds like a clog in the jointer BUT if it is, pull the inlet of of the DC housing and check that. There usually is a grate of some sort in front of the fan inlet. It's there to protect the fan from...

Back in the day when New Departure ruled the ball bearing world there was an "R" series of deep groove ball bearings that were made to imperial dimensions so the inch dimension is a distinct...

I've got an old BT3000 sitting in the shop. It's main function is a router table but it occasionally gets used for saw work if the Unisaw is set up and I don't want to break the set up. That said,...

It's been a while since I changed the blades on my 733. Buy a replacement set first. I think I got my last set on Amazon. To the best of my recollection the blades on the 733 are one sided, not...

Please enter me in te drawing.

Thanks

I've had the Craftsman version for years. Bought it because of portability and space limitations. I was working on some refurb on my sons house and needed something I could wrestle by myself and ran...

When we bought this house, we knew the kitchen cabs were some sort of a Lowes Product. Corner base cabinet had a fold out door and a Lazy Susan/ carousel.
Short story the welds holding the shelves...

One of the issues with Phillips in todays market is that that's not what the screws are. There iis another standard generally used on stuff from the pacific rim, JIS or Japnese4 Industrial...

I have used them twice, I don't get a whole lot of shop time these days. The first time I sent them a forrest blade that arrived with a unisaw that I purchased. Not knowing the history of the blade...

You are pushing it, but I think you know that you know that or you wouldn't be asking. Sure, you can run a 60 amp breaker in place of the two 30's. Might even give you an open slot in the panel.

A word of caution about expanding the search beyond the inner WB area. In the outer ares of James City County, New Kent, King and Queen and Gloucester. Determine what is available in the way of...

Petr, I had considered something along those lines, Not AliBaba per se but was looking for a Desigbed LED fixture. I was looking though at "New Work fixtures". Ones that could be installed without a...

How does the code address permanently installed sighting circuits? Do you supply for the rated maximum of the fixtures or to the load you are going to install?

I'm installing 32 recessed can...

The cogs on the poly v belts are to keep them flat across the width of pulley surface. IThe cogging gives you the flexibility to get around relatively small pulley diameters.