Search:

Great job Jeff.

How did you flatten the entire surface?

Your cabinet looks very nice.
what is the size of the middle section? It seams a bit small to put in any kind of electronics, most electronics are about 17-17 1/2" wide so having about 19-20" gives...

I think any time you see smear in the lettering of a blade it means it was used. They could have used it once just to show someone but never the less used.

I have see this enough times in my...

what is it that you think it is missing?. have you tried a setup using the fuji and the compressor+ all the extra accessories you mentioned side by side?

Are you saying this because the fuji is...

what kind of gravity feed gun did you get? is it the one that comes with the fuji or is it a different brand?

Thanks

So here is what I think is happening.
When the user goes from inside a message out to the list of messages, I notice that down below there is a "forum jump" drop down selection which is highlighted....

Hi moderators,
I notice that when I get into a message then I use the back buton, I am taken all the way to the bottom of the screen instead of the last messages I was reading.
Is there anyway you...

I notice everything is going up in price some sometimes more than 50% over the old price...

Good we are in a recession. I am afraid this hoby will become so expensive in 2 -3 years from now. The...

I think is 2874.00 to be exact...
http://www.woodcraft.com/product.aspx?ProductID=412405&FamilyID=63984

Thanks guys, this are all great ideas.

Hi all, I wanted to get your oppinion on how to re-cycle food glass jars to store stains and thinners.

Every once and a while we have an empty pickle glass jar. so how could I wash it/clean it so...

what tipe of masking tape do you use.

Jim, Stephen.

Thanks for your replies. I really appreciate you taking some time to set me in the right direction.

I just purchase the fuji mini-mite 4 stage turbine HVLP and it comes whith...

Thanks Dustin, Stephen.

I am surprise that more people have not commented on this question.
The reason I ask is because as I read the specifications of the HVLP's. I notice that some are 2...

Hi all,

Quick question, let say I buy a HVLP system some fuji or apollo or any other vendor.
If I wated to use a different spray gun, do I have to go the the HVLP manufacturer, or can I buy the...

Thanks Ben!

I hear very good review of the worksarp 3000.
I have a question, the specs say that the sharpening port can only accept blades upto 2" wide, how do you go about sharpening blades when they are wider...

Adam, if you want to use hvlp and don't want to spend a lot of money, take a look at this unit at Harbor Freight.
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=44677

You will...

how can a belt be 300$, what kind of belt are we talking about?

I built my on L shape desk and I made it 24" deep. I am using a flat panel monitor. I can include a picture of it if you like... I made my out of pecan and pecan plywood (cabinet grade).

Hi all Thanks for all the comments, suggestions.
I am including a floor plan of my house, to better explain my situation.
My house is a two story house, as you can see from the picture the blue...

Thanks for taking the time Tom.
I will certainly contact an Electrician.

Hi all, here is a picture of my electrical panel inside my house. This panel is on the same wall between my garage and the inside of the house. I would like to add 2 220v outlets on my garage for at...

James let us know the steps you took to get the epoxy onto the floors, also let us know the products you used to make it happen.

If you are refering to the Behlen dyes products, In my opinion, you can only spray them, this product dries very fast and if you try to brush it or use a pad you will never get the color even on all...