Search:

I think this is a fairly common problem on the 66. The miter slots are wider towards the blade and narrow at the ends. This is a result of the manufacturing process. I purchased mine around 1999 and...

Steve,

I do, call me.

Ralph

Well said John. I just looked at your website... WOW! Your boxes are absolutely beautiful. You are truly a craftsman.

The angle iron brackets that hold the fence to the saw are not shown in the pictures. The right side extension table is also not shown.

Make sure the sanding belt is tight to the drum. I've found occasionally the belt will stretch. The latch nearest the motor is designed to compensate for this, but if the belt is too loose you have...

Joy Yang has confirmed that both he and Yarde Feng are no longer employed at Shenhui Laser as after service engineers. Both are very professional and I have had good experience consulting with each...

Search craftid

This may be for another topic. From Jonathan's post... "I have no clue why a direct current tube would pulsate like it does. It's basically perforating the material." Dan, could you answer this one?...

You need to know if the water temperature is rising slowly as you cut. The tube will lose power as it gets hotter. This might explain why you are losing power late into a file. You also really need a...

More details would help.

What is the power rating of the tube?
How are you cooling the tube?
What is the ambient temperature where you're using the laser?
Do you have a Ma meter on the...

Thank you Shawn. You're a great Dad.

Ralph

Are removing the protective clear plastic covering?

274229
In the last post I forgot to add, when the Gladiator cabinet is rolled out, you gain a large area to put "stuff". The "stuff" you normally just lay on the saw and then eventually gets in the...

Sorry for the delay with the pictures. The saw I have is the ICS, the same as pictured in Wes' post.

274225
This a rolling tool chest from Harbor Freight. I cut the uprights and drilled new bolt...

I'm on my second version doing this. The first used a black Harbor Freight rolling tool cart. It looked like it was made for the saw. I then found an even better cabinet at my local Sears outlet.
...

Beautiful work Bruce. Glad to see you sailed up the river to Sawmill Creek.

Ralph

I had 2 of these. The first was replaced by the retailer, the second one did the same thing after about a year. The problem was rust on a splined shaft. At some point Ryobi changed the material to...

I'm in. Thanks

I'm in! Thanks

The tags look like they have been tumbled in a parts cleaner or surface conditioner. The edges look rounded and the surfaces peened. The center photo also looks like the tag has been chemically...

Brian,

Search "Gwinnett Woodworkers Association". We have several members with drum sanders that could help you out. The group meets most Saturdays at Peachtree Woodworking Supply. Details are on...

Daniel,

This past month I've been cutting a lot of 1/4" Baltic Birch using using air assist on a 80 watt machine. I noticed after only a few minutes my eyes felt like I had been welding without...

George... you are a genius!! Thank you

Nick,

Allstar Adhesives has a couple of sheet foam products that work great. They are a family business, very helpful and don't mind small orders. If you need any more info, just let me know.
...

Hi Ed,

Looks like the move to the SC coast was a good one. If you ever get back to ATL on a Saturday morning stop by Peachtree and say hello.

Take the third picture you posted and turn it 90...