Search:

Just in case anyone else has the same issue in the future I worked out my problem by trial and error. A corrupted .dat file. I deleted the .dat file in the epilog settings folder and saved a new...

I have tried a search but get all sorts of stuff and my bran is now full!

My Epilog Helix Mini 24 is driving me up the wall. I have a job that I have used, unchanged, for a few years now and...

I still need to test on a full sheet of engraving but it seems to be behaving in the center section now.

What I did:

Removed the (new) encoder strip and wiped it. Wiped the bar that screws on...

I will test the cable out again. There must also be a reason why it happened with the old and the new cable. Frustrating.
I have attached a test I have done to see where it kicks in. This time...

Thanks Dan,
I have changed the ribbon cable and the encoder strip. I have found that if I stick to the left or right of the bed everything is fine. If i use the middle of the bed it jumps and...

My laser head is nudging over to the right. It seems to be fine if I engrave on the very left or very right of the bed but if I engrave in the middle band the engraving nudges over. It started as...

I have just had a strange problem. I have recently changed to a 64bit Windows 7 computer (from 32bit) so have spent lots of time installing drivers etc. I am battling with sending jobs to the laser...

Thanks for the suggestions. I have just placed an order 908, I love getting new stuff!

Thanks John, I have sent a message.

Thanks Michael

I live in Zambia and use a courier service to deliver here. Companies in the UK that would not normally ship to Zambia do not mind stuff going via a courier company and it is a...

Can someone please recommend a reliable online supplier of Rowmark flexi brass in the UK. I have found a couple but you either have to phone and order or collect in store. I need a company that...

If you don't select the Center Engraving options in the Print Properties the Epilog uses the top left as your start point.
But if your Corel Page Size and Epilog Print Options Piece Size are not...

For repetitive jobs of the same size I set my page size in Corel to the size of the items to be engraved - make sure you set the page size to the same as the Corel page size in the Epilog Print...

Success! I have been doing a fair amount of wood and leather recently and, whilst I had removed the visible part of the auto focus plunger soon after I received the machine the remaining swithc part...

Hi Martin

Thanks for your reply, the "Can not reset!" message happens as soon as I press the reset button regardless of when I press it, even if I have no jobs sent to the machine (I had the auto...

I have tried searching for help on these problems but no luck.

My Epilog Mini 24 has started giving me a "Can not reset!" error when I press the reset button. This is very frustrating as I...

I agree with Dee - start with the basics and ensure a solid grounding. There are so many people out there who use computers in their daily lives and have no idea how to USE them. I have had the...

Here is the Corel file, for some reason my steam driven internet access would not let me add another attachment!

I am not sure if this is what you were looking for. I did as John suggested, put a contour around the scribble, I then broke the contour group apart and made the scribble thicker than hairline, so...

Hi Emma

For colour fill you can use any colour acrylic and any colour paint - I have just done some badges, yellow with black writing - they were very effective. I have found that the deeper you...

What about engraved acrylic colour filled with paint.
A board with two hooks (those L shaped screw in ones would work) for each name and then name tags with two holes in the top corners so that...

I have just engraved two bottles of whiskey and painstakingly highlighted the engraving with gold rub n buff. The bottles were donated by my husbands company as prizes for a fund raising golf day. ...

Thanks Carla
Will try and give them a ring when I am in SA

Regards
Carrol

Hi Rodney
I don't use huge amounts of the stuff, a couple of sheets will keep me going quite a while so the cost of postage makes it very expensive. I got the LP-20 LasePaste from AMS, it has their...

A question for the South African members - Has AMS folded or moved? I was in SA recently and just 'popped round' to stock up and ..... gone! I have sent an email but no reply. Bother. I am going...