Search:

We were selling ULS machines with Corel Draw X6 from the day it came out (and in the past V12, X3, X4, X5).
Our custimers are happy and do not seem to have any version sepcific issues, if at all. ...

This feature is working for years now.

One thing you have to keep in mind though. It would only be possible to drag and throw colors BEFORE the job is finalized.
After job is prepared, the...

All the settings are in the graphic software.
ULS driver is looking for "pure" color combinations, and it does not matter whethere they are represented in CMYK, RGB or what ever other pallettes.

I can contribute from our experience.

If it is VersalLaser, replacing the tube is quite easy, however more complicated than changing a light bulb.

You need a full set of allen keys. Open the...

A few HPDFO clarifications.
HPDFO's focal distance is approximately similar to 2.0", therefore if it could theoretically cut thick boards, it would have been with similar angle.

HPDFO has...

Thank you all for the information. It is really helpful.

I would like to add for those who give it less significance.

Firstly, I do not see anything wrong that awareness causes people to be...

Hello Creekers,

Does anyone know about a source for safe MDF?
The standard MDF has Formaldehyde fume when being processed by the laser.

I am looking for a material that does does it with...

Acrylic sheets come in several ways.

Extruded - thses are the brittle smelli that cost less. They have one advantage over cast sheets - their thickness is constant accross the board

Cast- They...

This is a pallette issue with Corel settings.
Look to find if you have old pallettes from Universal and add them in Corel folder.

In Corel - Adding Pallettes



In Corel - avoiding color...

I also recommend to keep the pressure at the lower range.
I saw customers who used too high pressure and their air assist piping suffered severly.

However one additional point should be...

Creek Friends,

Most MDF boards are made with toxic resin and pollute Formaldehyde fumes.
If you still decide to challenge your health, at least care for excellent fume extraction from you...

If I remember well, the APLaszer was relatively new at your shop, and you were very happy about it.

One should make a choice between a system that is continuously being developed and enhanced for many years to come, and DIY machinery.

ULS system (with the connected PC's) are reliable at least...

You can find even cheaper than that in China.
Still there is no apparent way how and when you would get an easier and friendlier software/user interface/driver. If it was a car you would not buy...

This is exactly my point. If you bought a ULS in 2007, ALL versions of the drivers which were actually enhanced over the years - can take your old jobs and flawlessly process them.

I did not...

I'm afraid you are under estimating the task, and over estimating the potential quality of the outcome. These are ends that never meet.

Programmers's job is never done. You write 90% of the...

It eventually evolved much closer to my description.
Old series (M V X) had the old generation architecture (CPU, memory etc). Now all new series (since 2007) are using the external resource...

Rodney,

I would like to contribute to the discussion, but it is important to make it clear to every one in this forum, that I am a Universal Lasers distributor in Israel. Please refer to this as...

Dear Friends,
I am in the 3D printing and 3D scanning business. My company is the distributor for Z Corporation in Israel.

The link above with the wrench shows scanning with ZCorp's ZScanner800...

Why not just use thumb tacks?
What could be more affordable, painless to replace, randomally spread at any density and field size?

This is the first picture I found, but you can easily find it in...

First of all, weakening tube does not necessarily go "All Or Nothing". There could be many reasons for such issues.

And a few comments:
1. Universal should know when your tube was replaced...

I believe that this functionality is there for several ages (of the UCP driver).
Is there any additional behavior to it which I overlooked?

Thanks

Zvi

I can tell you, but then I will not have to kill you (DIY).

For basic alignemt review, tape the left side of the lens carriage (the round hole), and view the red dot at all 4 corners.
Dot should be about the center of the round hole, and more inportant -...

David
Just make sure to have the latest UCP drivers.
It should be version 5.28.52.2